In addition, the Caller List can be used as a convenient source of programming data – the details of any previous incoming calls found in the Caller List can be stored in the Direct Access memory keys and/or the Directory memory by a simple transfer process, thereby reducing keystrokes and eliminating potential error that may otherwise result during manual storage of the same details. Please see the relevant sections entitled “To store a caller’s details in a Direct Access Memory from the Caller List” and “To store a caller’s details in the Directory Memory from the Caller List”.
CALL WAITING DISPLAY
The IQ750 can display the details of a current caller while you are already on a call. To enable the Call Waiting feature, you may need to request or subscribe the Call Waiting Service from your network provider. For details, please call your service provider.
Note: It is not recommended to use more than two Caller ID phones in parallel on the same line as their performance may be affected. For example, Caller ID display of a second call while you are
CALLER LIST
The IQ750 stores the details of all incoming calls in a Caller List, which is accessible by pressing the Caller key. The Caller List can store up to 80 caller records, and when it has reached its full capacity the oldest record will be removed to accommodate the new call.
To view the Caller List and dial a Number in the Caller List
1.Press CALLER to display the most recent incoming call; if there is no entry in the Caller List, the display will show “NO ENTRIES”
2.Press Scroll 
to move on to the previous call; subsequent presses will display successively earlier calls
3.To dial a number displayed; press DIAL
4.If the end of the Caller List is reached, the display will show “END OF LIST”; you may continue to scroll 
or 
to review the list again
5.If you choose not to dial any number from the Caller List, the DISPLAY will revert to clock mode in 10 seconds.
30
