Setting UP, Unpacking, General SETTING-UP | Interquartz IQ750

2. SETTING UP

UNPACKING

The carton contains the following:

•Telephone body and handpiece

•Coiled Handset cord and line cord

•9V DC Adaptor

•Quick Start-up Guide

GENERAL SETTING-UP

1.Fit the Coiled Cord to the appropriate sockets in the Handset and in the telephone base - please do not connect the coiled cord into the Headset jack

2.Fit the Line Cord to the rear socket and to your telephone network outlet

3.Set the Ringer Volume and the Ringer Pitch controls

4.Lift the handset to check for dial tone and to wake up the DISPLAY

5.If using a Headset, connect it to the Headset jack (See Figure 2B)

6.Fit the Adaptor Plug to the 9VDC Jack and plug in the Adaptor to a mains power outlet

7.Follow the instructions below for general installation

8.See section 9 for other installation instructions and technical settings.

LINE CONNECTION

This telephone is supplied with an RJ45 Plug as the wall plug, with the centre pair being reserved for speech and signalling. Other types of plugs and cords are available on request.

DISPLAY BRIGHTNESS ADJUSTMENT

With the telephone on-hook and in an idle state, press Cursor and to alter the display to achieve the best contrast for your lighting conditions.

8

Image 8

Interquartz IQ750 manual Setting UP, Unpacking, General SETTING-UP, Line Connection, Display Brightness Adjustment

Contents

Caller ID Handsfree Headset Business Telephone Model IQ750 Contents Memory Operation Illustrations Caller ID CLI Features FeaturesHeadset Savvy Features General Functions Message Waiting Operating RequirementsLiquid Crystal Display Setting UP General SETTING-UPDisplay Brightness Adjustment Unpacking Date and Time SET UP Display Date Setting AM/PM Setting Basic Operation General Controls and Indicators TOP View Ringer Pitch Control RINGER/MESSAGE Waiting IndicatorRinger Volume Switch Reset KEY Cradle SwitchVolume Slider ALPHA-NUMERIC Keypad Pause Function Mute KEY and IndicatorRedial KEY HANDSFREE/HEADSET KEY and Indicator Timer KEY and Automatic Call Timer FunctionTo use Handsfree mode To use Headset mode Battery Compartment Display Icons and Fields Number Field Name Field Incoming calls using Handsfree Outgoing calls using Handsfree manual or memory dialingHandsfree Operation Changing from Handsfree to Handset during a call Hints for Handsfree Operation HEADSET/HANDSET/HANDSFREE Modes TRAINEE/SUPERVISOR ModeHeadset Operation Alert Light Support Silent Ringing Direct Access Memory Keys Memory BackupMemory Operation Memory Storage Direct Access Memory Capacity To store a Number and Name in a Direct Access memorySpeed-Dialling Storable Handsfree code Speed-Dialling and Automatic Hang-up To dial from a Direct Access Memory Direct Access Memories and the Memory Protection Switch Memory Protection Switch To dial from a Protected Direct Access Memory To Store a Number and Name into a Directory Memory Directory MemoryDirectory Memory Capacity To dial from the Directory Memory using Name Search Last Number Redial MemoryTo edit an entry in the Directory Memory To delete an entry from Directory Memory Using the 5-Stack Last Number Redial Memory Using the Caller ID Display Call Waiting Display Caller List Display of a Typical Call from the Caller List Page Page Talking Text SMS Messages Manually Resetting the Message Waiting PromptsAdvanced Network Operation Automatic Pause Insertion Pause Function When Dialing OUTAutomatic Trunk Access Digit Insertion Pause Time Using the Memories Holding and Transferring CallsSpeed Dialing Cascade Memory Dialing Wall Mounting InstallationLocation IQ235 Wall Mount Bracket Modular Wall Jack and Link Cord IQ235 Wall Mount Bracket BREAK-OFF Lugs Headset MIC Adjust Control Message Waiting Light Compatibility To Make a Headset MIC Level Adjustment Headset Polarity Switch Headset MIC Adjust Control and Polarity SwitchPage Failure to Operate and Service Difficulties General Care and MaintenanceCleaning Warranty 6 Years Thunderstorms Service and Product Services International Quartz Limited