If two Pauses (i.e. 200 mSec) do not produce a long enough
The Pause time setting remains set until the user changes it - removal of power sources or line connection will not change the setting.
HOLDING AND TRANSFERRING CALLS
The method used for these functions is dependent on your system type, so you will need to check your system’s Extension User Guide. The RECALL Key is typically used to transfer calls and the Recall Timing setting affects the Recall Key’s ability to function correctly with your system (see below).
USING THE MEMORIES
Any combination of numbers, 
and 
, Pause, Recall and Handsfree commands can be stored. You may find it useful to store some of your favourite network facility commands in the telephone for fast, convenient access to those facilities (e.g. Diversion, Call Forward, Call Back etc). Consult your system User Guide for the codes that you need to store. The Direct Access Memories can be
Speed Dialing
When storing a number, you can add a “Speed Dialing” command to the start of the number. This makes dialling faster and easier. The “H” command, entered by pressing the HANDSFREE/HEADSET preceding the telephone number in the Memory Storage procedure, activates the Handsfree function during dialing so that you can make a Handsfree call just by pressing the memory key once it is programmed.
Cascade Memory Dialing
The contents of more than one memory can be “cascaded” or added together during a call to create a long dialling sequence by pressing the required memory keys in the desired order. This feature can be used to store unusually long numbers, which may exceed the digit capacity of any individual memory.
37
