Haier LE42H330, LE46H330, LE55H330, LD42K3 owner manual Lock Setup, How to use the password function

Basic Receiving and Playing Operations

cleared.

On channel: This function is used in combination with the On/Off Time function. When the TV turns on upon reaching the On time, it automatically enters the preset channel.

• Press OK first and then press / to set the On Channel or OFF.

Remind Time/Remind channel: The remind time and remind channel functions allow the TV to automatically enter the preset channel at preset time. If the TV is AC off or forcible DC off, the preset time will be cleared.

•Press MENU on the remote control unit or MENU on the TV's front panel to display the main menu,

and then press	/	to select the Timer menu,
afterwards press	/	to select the Remind
Time option.

•Press OK to enter the setting screen, and then

press	/	to select ON or OFF, if you select ON,
press	/	to set hour and minute, and then
press	/	to adjust time.

•After finishing time setting, press OK or MENU to confirm

• Press / to select the Remind Channel option, and press OK first and then press / to set the found.

Lock Setup

The television has the function of security default lock. Password needs to be entered when the program lock mode is to be set.

How to use the password function

Press H. LOCK, the TV screen will display Enter Password to prompt the user to enter password by pressing corresponding numerical keys; if the password is correct, the user enters the Lock Set menu; if incorrect, the user is required to enter a password again.

If there is no operation for a few seconds, the display will automatically disappear.

The Lock Set menu is as follows:

Lock Set

Change Password	OK
Tuning Lock	off
Preset Source	off
Preset Prog	off
Source Lock	OK
Child Lock	off
Max Volume	100
Power On Volume	off
Unlock	OK

Change Password

After entering the Lock Set menu, press / to select the Change Password option, and then press OK to display the Change Password menu, afterwards enter a new 4-digit password by pressing numerical keys and repeat entering this password once again.

If the user does not want to change the password in halfway, he may press MENU to exit from this menu.

Note

The initial password is 0000, and the password setting will not be changed after executing the Unlock option.

Tuning Lock

Press	/	to select the Tuning Lock option, and
then press		/	to set ON or OFF.

(If set ON, the Tuning Menu is not available in TV mode. To make any operation related to the Tuning Menu, it need to enter the Lock Set menu to set Tuning Lock OFF or execute the Unlock option.)

Preset Source Setting

Preset Source may be set as Off, TV, AV,Component, HDMI, PC and USB. When the Preset Source is set as TV, after entering the Preset Channel menu, press

/to select the preset channel, and the channel will be forcibly switched to the preset one upon turning the TV on; when the Preset Source is set as other signal sources, the TV will be forcibly switched to the preset source upon turning on. For example, when the Preset Source is set as YPbPr/YCbCr, the TV will be switched to YPbPr/YCbCr upon turning on; when set as OFF, the preset function will be closed.

Preset Prog

Only when the Preset Source is set as TV can the Preset Channel option be available. Press / to select preset channels from 0-255.

20 LED -LCD television Owner’s Manual