Maintenance / Troubleshooting
Note
❏The red button on the control can doing some delete. Text playback support TXT format.
Maintenance
DTo exit the Text mode, just press BACK repeatedly.
Settings
A After entering USB main interface, press / to select the Settings option.
BPress OK to confirm the selection and enter the
settings selection interface, and then press | / |
to select the required options. |
|
Maintenance
Early malfunctions can be prevented. Careful and regular cleaning can extend the amount of time you will have your new TV. Be sure to turn the power off and unplug the power cord before you begin any cleaning.
Cleaning the Screen
AHere’s a great way to keep the dust off your screen for a while. Wet a soft cloth in a mixture of lukewarm water and a little fabric softener or dish washing detergent. Wring the cloth until it’s almost dry, and then use it to wipe the screen.
BMake sure the excess water is off the screen, and then let it
Cleaning the Cabinet
To remove dirt or dust, wipe the cabinet with a soft, dry,
Extended Absence
If you expect to leave your TV dormant for a long time (such as a vacation), it’s a good idea to unplug the power cord to protect against possible damage from lightning or power surges.
Photo Slide Time
Set the scan speed of pictures to be scanned in slide form.
There are three options (Middle/Slow/fast). Press
/to select the desired option.
Movie Subtitle
Press / | to select "ON" or "OFF". |
Troubleshooting
For the sake of time and cost, it is strongly recommended that you checkout the problem by yourself according to the instructions listed hereunder before contacting the
Problem | Possible remedies |
LED