
Basic Receiving and Playing Operations
B Press / to select the “Confirm” option, you will enter the interface for selecting a corresponding 3D mode. (See Fig. 2 below)
If the TV is currently in the 3D
mode:
APress the 3D switch key on the remote control to call out the prompt menu. (See Fig. 3 below)
B Press / keys to exit the 3D mode or cancel the exit.
Note
❏When you watch a 3D TV program, please wear and turn on 3D glasses.
❏If the signal currently detected in the HDMI channel is one of 3D signals specified in the
Specification HDMI1.4a, selecting the “Confirm” option will make the TV directly switch to a corresponding 3D mode, so the above Fig. 2 will not appear and you needn’t choose a 3D mode.
❏In the 3D mode, the TV screen display menu can still be called out and displayed normally.
❏The TV doesn’t memorize the setting of 3D mode, so it will be in the 2D mode when you turn it on again after turning it off.
❏In the USB mode, there are various modes of 3D video sources. With USB signals, the 3D switch key functions only when playing a video (film). The TV will exit the 3D mode when playing ends or when
you manually exit the 3D mode.
Advanced function
Streaming Media Playing System
Note
❏The diagrams in the following section are schematic and only for your reference. Please see the actual product if necessary.
ASupported file formats:
•Picture: *. JPEG; PNG; BMP;
•Music: *.
•Movie:
MPEG4: *. avi files in accordance with Div*4. x/5. x Protocol;
MPEG2: some *. mpeg files;
MPEG1: *. dat and some *. mpeg files; RealVideo
•Text: *. Txt.
Note
❏Due to the particularity of file coding, some files may be unable to be read.
BSupported equipment:
Support the equipment that supports Mass Storage Protocol and whose file system is FAT/NTFS/FAT16/ FAT32, such as some USB disks, mobile hard disks, card readers, MP3 players and digital cameras.
If USB equipment could not be identified due to unsupported file system, please format the equipment to the
CThe external card reader supports most of the digital cards in the current market; the types of digital cards that can be read are relevant to the performance of selected card reader; you may attach standard mobile hard disks (working voltage 5.0V, working current not higher than 500mA); during media playing, do not pull out storage media, otherwise it may cause system halt, damage the files in storage media or damage USB equipment; sometimes, the TV may halt due to overhigh information error rate, in which case you should restart the system; there are a lot of nonstandard USB mobile equipment
in the market, they may not be identified when connected to the streaming media playing system; the above phenomena may also occur on computers and are not the TV’s fault.
DTo achieve smooth playing, ensure the following:
22 LED