Cable Connections
Turn off all devices before making system connec- tions. Do not connect the power until all connections have been made.
Antenna Input
Use this connection if you are using an indoor or outdoor antenna to receive television signals.
Antenna Line
1.Connect the antenna line (75Ω coaxial cable) to the TV
Antenna In jack located on the rear of the unit.
To view an analog antenna signal (NTSC):
1.Set the Antenna option to “Air” TV setup menu.
2.Set the unit to TV mode (the screen will display the current channel number).
NTSC television broadcasts will cease in the USA on February 17, 2009. To receive
Page 24 | Coby Electronics Corporation |
|
|