TV Mode (Analog TV)
Set the unit to TV mode to view analog NTSC TV broadcasts.
Press to switch the unit to TV mode. (You can also press to toggle quickly between DTV and TV modes.)
NTSC television broadcasts will cease in the USA on February 17, 2009. To receive
Basic Operation
1.Ensure that all cable connections have been made properly and securely (refer to the section “Cable Connections” for details).
2.Press to turn the unit on or off.
3.Press until the screen displays “TV” to enter TV mode.
4.If this is the first time you are using the unit, use the TV setup menu to
5.Press or to adjust the volume level.
•Press to disable the sound completely. To restore the sound, press again.
6.Press or to scan through the available TV chan- nels.
•Press to return to the previously selected chan- nel.
Page 44 | Coby Electronics Corporation |
|
|