Changing Channels
After you finish scanning channels, and the scanned channels are stored. You can start to watch TV.
Using the channels buttons
1.Press CH Ÿ / ź buttons to change channels in sequence.
2.You can also press 0 - 9 numeric keys and
““ button to select a specific channel
directly. Press Enter button to switch to your desired channel at once.
3.When you watch digital TV program, you can press “ “ button once to display all possible
channels on the same frequency in a list. Then press “ “ button repeatedly to select a channel for TV to tune to.
Using the RTN buttons to switch back previous channel
To quickly switch between two channels, tune to one channel, then use the numeric keys to select the second channel. Then press the RTN button to quickly alternate between them.
Adjusting The Volume
Using volume control
Press the VOL + / – buttons to increase or decrease volume.
Using mute
At any time, you can turn off the sound using the
MUTE button.
1.Press the MUTE button and the sound turns off.
2.Press MUTE again or VOL + buttons to resume audio back to the previous volume level.
26