Westinghouse TX-52H480S user manual Determining Available Channels

English

Determining Available Channels

ξWhen connected to an antenna, cable or other RF (radio frequency) source, you’ll need to run “Autoscan”—available in the “TV” menu of the OSD (see page 26 for more information)—in order for all available channels to be received

—Use the up/down arrow keys to scroll below “Tuner” to “Auto Scan” —Press “Enter” to start scanning for channels (identification of all

analog and digital channels may take several	minutes)
NOTE: Depending on your area, some channels shown
may not be available for viewing.

ξFirst Time connected to RF the system will automatically select the Autoscan function.

20