Wharfedale LY22T3CBW-UM manual Video Input, Connection and use steps

Connection Instructions

(If connected to S-Video,select the S-Video external input source.)

3.Refer the DVD player's manual for operating instructions.

Component Input ports

To get better picture quality, connect a DVD player to the component input ports as shown below.

S-VIDEO Input

To avoid picture noise (interference), leave an adequate distance between the VCR and TV

Connection and use steps:

1.Read the user guide supplied with your AV devices and ensure that it has S-Video connectors;

2.Make sure that the power of the LCD-TV and the AV device are switched off;

Connection Option 1

Set VCR output switch to 3 or 4 and then tune TV to the same channel number.

Connection Option 2

1.Connect the audio and S-Video cables from the VCR's output jacks to the TV input jacks, as shown in the figure.

2.Insert a video tape into the VCR and press PLAY on the VCR. (Refer to the VCR owner’s manual.)

3.Turn on the power of the LCD-TV first ; and then turn on the power of the AV device;

4.Set the video input mode of the LCD-TV to .S-Video mode .

2

1

VCR