CyberHome Entertainment CH-DVD500 owner manual Composite / S-Video & Stereo Audio Connections

S-Video Connector

Composite / S-Video & Stereo Audio Connections

1 Typical Connection - Connecting to a TV with Composite Video In and Stereo Audio In

If your TV has only a single Video Input jack, typically a yellow-colored plug, you will use the Composite Video output of the DVD Player for the Video Connection. We’ll also assume your TV has Red and White Stereo Audio In connectors. You will use these for the Audio Connection.

ŸUse the included Video Cable (Yellow) to connect the Video Out of the DVD Player to the Video In of your TV.

ŸConnect the Stereo Audio outputs (Red-Red, White-White) of the DVD Player to the matching Inputs of your TV.

ŸConnect the Power Cord to the DVD Player and AC Power Outlet.

ŸTurn on the TV and DVD Player (power switch on back) and select the Video Input on your TV. On some models, this may be called “Input 1” or “Aux In”. You should now see the DVD Player’s splash screen on your TV.

ŸChange the ANALOG Setting in the DVD Player’s Setup Menu to 2CH. (See pg 32)

DVD

Y

ANALOG OUTPUT

Pb		R	VIDEO
VIDEO	R		IN
OUT
Pr
S-VIDEO	L	L	STEREO AUDIO IN
OUT
VIDEOVIDEO	AUDIO		R
			(RED)
			L

TV

(WHITE)

2 Connecting to a TV with S-Video In and Stereo Audio In

If your TV has an S-Video Input, it’s recommended that you use this connection. S-Video separates brightness and color signals, resulting in higher video quality than Standard Composite Video.

Ÿ You must purchase a separate S-Video Cable for this connection (not included).

ŸConnect the S-Video Out from the DVD Player to the S-Video In of your TV.

ŸIf you are not using a separate receiver for audio, connect the Stereo Audio outputs (Red - Red, White - White) of the DVD Player to the corresponding Inputs of your TV

ŸConnect the Power Cord to the DVD Player and AC Power Outlet.

ŸTurn on the TV and DVD Player (power switch on back) and select the S-Video Input on your TV. On some models, this may be called “Input 2” or “Video 2”. You should now see the DVD Player’s splash screen on your TV.

ŸChange the OUTPUT Setting in the DVD Player’s Setup Menu to S-VIDEO. (See pg 31)

ŸChange the ANALOG Setting in the DVD Player’s Setup Menu to 2CH. (See pg 32)

DVD

Y

ANALOG OUTPUT

Pb	R	R	S-VIDEO
			IN
Pr
S-VIDEO	L	L	STEREO AUDIO IN
OUT
VIDEOVIDEO	AUDIO		R
			(RED)
			L
			(WHITE)

TV

13