CyberHome Entertainment CH-DVD 300 Using the On-Screen Setup Menu, Press the Setup Button

Using the On-Screen Setup Menu

Adjusting Video and Audio Settings in the DVD Player Setup

Your DVD Player features an on-screen Setup Menu that allows you to adjust settings for your Video and Audio preferences, and enable player features like Parental Lock. When you change settings in the Setup Menu, they are stored even when power is turned off. If you wish to return to the factory defaults, they can be easily reset in LANGUAGE SET OPTIONS.

1

SETUP

1

Press the SETUP Button			POWER	DISPLAY	SETUP	OPEN/CLOSE
Press SETUP to enter the on-screen Setup Menu. The initial			TITLE	MENU	GOTO	PROGRAM
				PBC
screen contains the following categories:			ANGLE	SUBTITLE	AUDIO	MUTE
		2				PLAY
						STOP
				ENTER
						PAUSE
SYSTEM		DVD	RETURN	BOOKMARK	ZOOM	SLOW
OSD LANGUAGE	ENGLISH					1/ALL
SCREEN SAVER	OFF					REPEAT
AUTO STANDBY	OFF					A-B
LOAD SETUP DEF	OK					EFFECTS
S/W VERSION	XX.XX.X.XX
						INTRO
					10+

3

2 ENTER

Moving Around the Menu with the ARROW Keys

Use the Left / Right ARROW buttons to switch menu screens. In this example, press SETUP and then the arrow key to change from SYSTEM to VIDEO Menus, then press RIGHT Arrow key to enter that Menu. Then we’ll hit the DOWN key twice to select BRIGHTNESS.

Pressing the LEFT or RIGHT key allows us to adjust the BRIGHTNESS of the display.

Change SETUP	Adjust Brightness and press ENTER to confirm change
VIDEO MENU (2)
	ENTER

	DVD
OSD LANGUAGE	ENGLISH
SCREEN SAVER	ON
LOAD SETUP DEF	OK
S/W VERSION	01.10.B.21

Select Brightness

If you want to change to another settings, use the UP/DOWN arrow key to move to options shown. To select different Setup Menu, you must the press the UP arrow keys until the cursor is highlighting the Setup Menu shown. Then press the Left and Right arrow keys to select other Setup Menus.

DVD

SETUP

3 Press SETUP to Exit the On-Screen Setup Menu

You can exit the Setup menu at any time by simply pressing the SETUP key.

27