Audio Setup Options
Adjusting Audio Settings in the Audio Setup Page
The settings you choose in the Audio Setup Page will be determined by the type of audio equipment you are using with the DVD Player. The factory default settings are configured with the assumption that you are using the player with a standard Television supporting Stereo Audio Inputs. This menu will allow you to enable the Digital Audio Output if you wish to use the Coaxial Digital Audio Output with a Digital Receiver.
DIGITAL OUTPUT
SPDIF (Sony/Philips Digital InterFace) refers to the digital audio format used by most consumer electronics equipment, as well as the Coaxial Digital Audio Output connector. If you are using the Stereo Audio Outputs, leave set to OFF. If you wish to use the Coaxial Digital Output, change this setting to BITSTREAM or LPCM. 48K Generally, the BITSTREAM setting is used with receivers capable of Dolby Digital 5.1 or DTS 5.1 channel decoding, while the LPCM 48K setting is reserved for two channel
DVD
AUDIO
DIGITAL OUTPUT | BITSTREAM |
30