Trouble Shooting

Should your DVD player develop a problem, please check below before requesting service:

Symptom	Check and Action
No Power	Check if the power cord has		been properly connected to the power outlet.
	Check if	the main power has	been switched on.

Does not play	No disc,	load a disc.

Disc has been loaded upside down. Place the disc with the label side up.

Disc's region code does not match to the player.

Disc is not correct type for player.

Disc is damaged or dirty, clean the disc or try another disc.

Moisture may be condensed inside the player. Remove the disc and leave the unit power on for one or two hours.

No Picture	Check if the TV set has power on, use TV remote to select A/V signal for
	DVD rather than broadcast.

Check if the system connection is proper and secure.

Check if the connection cables are damaged.

	Clean the	disc.
Picture	The disc is	dirty or damaged.				Clean the disc or try another disc.
noise / distorted	Reset the color		system of the			player or the			TV set.

	Try to direct the player				to the TV set instead of via other components,
	such as a VCR.

Picture not full	Select the screen			format from the			player's SETUP MENU,
screen	see " SETUP MENU " of t his manual.
	Select the screen			format from DVD				disc menu.
Malfunction	Should the player			develop a malfunction,					unplug the player	for
	30 minutes. After			30 minutes, power				on the player and the restore
	function should reset				the player.

No sound	DTS disc used.		Press the remote				control “LANGUAGE" button			LANGUAGE
										and
	re-select the audio			setting on the			remote.

TROUBLE SHOOTING