12
CONNECTING
ANTENNA
Radio signals may be difficult to receive in
some buildings and under certain conditions.
The provided antennas will help in their reception.
They are intended for indoor use only.
AM Loop Antenna
The placement of the AM loop antenna should
be in a direction that provides the clearest reception. Keep as far as possible from DVD receiver, TV set, and speaker and power cords. If reception remains poor, an outdoor antenna may be necessary.
To connect the AM loop antenna:
1.Hold down handle
2.Insert wire end into hole
3.Release handle
Position for best reception
FM Indoor Antenna
The FM antenna should be fully extended and in a direction that provides the clearest signal. Secure the antenna ends in a location where distortion is a minimum. If reception remains poor, an outdoor antenna may be necessary.
To connect the FM antenna:
1.Open cable terminal by pressing back on tab 2.Insert wire end
3.Release tab; make sure wire is in terminal securely
AM
FM
FUNCTIONS
N/P
This DVD receiver supports video output of
various systems, including auto, NTSC, and PAL. The picture will blink and become colourless when the wrong system is selected. If this occurs, press the N/P key on the remote control, then select the correct system (NTSC for North America, PAL for Europe). For more information on output format, refer to the TV set's manu- facturer's instructions.
Subtitles
The unit has the capability to display subtitles
in any of 32 different languages.
1.Press the SUBTITLE key. The subtitle menu will appear. Select the desired language by pressing the SUBTITLE key.
SUBTITLE | SUBTITLE 02/08 ENGLISH |
2.To remove the subtitles from view, press the SUBTITLE key until they disappear.
SUBTITLE OFF
Language
The unit has the capability to show movies in
one of eight languages.
1.Press the LANGUAGE key. The language menu will appear. Select the desired language by pressing the LANGUAGE key.
LANGUAGE
AUDIO 1/8
Note: The disc being played must be
LOCATING A TITLE
DVD discs are normally divided into titles, |
| |
which are then |
| |
specific title can be easily found with this unit. |
| |
Specific titles can be found using either the title | 17 | |
menu function, if the DVD disc contains a title | ||
menu, or through its unique title number. | ||
|
Title Menu Function
1. Press the TITLE key. The title menu will |
appear on the TV screen. |
2. Press the appropriate scroll key to select |
the desired title. A title may also be located by |
pressing its assigned number with the number |
buttons. |
1 | 2 | 3 |
Outdoor AM antenna
Coaxial cable(75 ohm)
FM
Coaxial cable (75 ohm)
Outdoor FM antenna
Note: The disc being played must be multi- subtitle encoded.
Camera Angle
The ability to change the camera angle allows
viewer to play director and watch a movie from
different perspectives.
1. Press the ANGLE key on the remote control.
With each press, the camera angle changes.
2.The key may be pressed only when the flashing angle icon appears in the unit's display panel.
ANGLE | 1/4 |
Note: Camera angle may be changed only in discs with
3. Press the ENTER key . This will start |
playback from chapter 1 of the selected title. |
Note:
Some discs do not respond to this function. If different instructions appear on the TV screen, follow those instructions. The Instructions given here describe the basic procedure. Procedures may vary depending on the content of the DVD disc. When playing a VCD2.0 disc, TITLE key can be used to return to menu.
Pro Logic selector
When player DVD / VCD disc, first press STOP key, than press Pro Logic key to select Pro Logic ON or OFF.
When player CD and at tuner state, press Pro Logic key to select stereo or 5.1 channel output.