Curtis DVD6040 instruction manual Basic DVD Operation, Connecting Power Supply

Page 14

BASIC DVD

OPERATION

AUTO

2X

2X

MEMO

FUNCTIONS

Screen Display

While a disc is playing, the status of various

functions may be checked, such as the tile, track

number, and several time categories.

1.Press the DISPLAY key once and the title appears along with the chapter and how much time has played.

DISPLAY

00:04:0800:40:52

CONNECTING

POWER SUPPLY

POWER

16

To activate either function, simply press the key or key on the remote control. The speed changes each time the key is pressed. To resume normal playback, when press the PLAY key.

Memory Playback

This unit allows the viewer to stop playback,

then later continue playback from that exact disc

location. Press the STOP key to halt playback. The unit then will memorize the location where playback was stopped. To resume watching,

press the RESUME or PLAY key and the unit will

resume playback from the exact location where playback was stopped. (Exclude Mp3 DISC)

When you play DVD discs, press MENU or TITLE key return menu and title, the unit then will memorize the location, To resume watching

press the RESUME key and the unit will resume

playback from the exact location.

RESUME

RESUME

2.Press the DISPLAY key again and the remaining time for that particular title appears while soundtrack is CD/VCD format.

VCD 2.0

Track 1/15

3.Press the DISPLAY key again and the total elapsed time for that particular chapter appears. while soundtrack is DVD format.

DVD

 

00:01:32

01:44:34

Title

1/10

Chapter 2/4

Angle 1/1

Audio

1/3

6CH

 

Subtitle

1/1

 

 

 

VOLUME

DVD/CD/MP3/HDCD/CD-R/CD-RW

 

DOWN

UP

DVD6040 DVD HOME THEATER

 

Before plugging the power cord into the AC outlet, check to make sure all of the connections have been properly completed. When they have been, carefully plug power cord into outlet.

Press the POWER button on the front panel to power the unit. The display panel will light.

When the unit is initially powered, a brief surge of electricity may cause interference with other

13

electronic equipment on the same circuit. If this occurs, connect the unit to an outlet on a

different

circuit.

 

 

 

 

BASIC OPERATION

Slow Motion

This DVD receiver has the ability to play discs in slow motion in either forward or reverse direction. Each time the SLOW key is pressed, the speed will slow from forward slow speed1/ 2, to 1/ 4, to 1/ 8, to 1/ 16 to reverse slow speed 1/ 2, to 1/ 4, to 1/ 8, to 1/ 16, to normal speed. To resume normal playback, press the PLAY key.

4.Press the DISPLAY key again and the display turns off.

Selecting Sound Source

1. Press any function button (DVD, AM/FM,

AUX1, AUX2) to select the desired sound source.

The appropriate symbol will appear in the display.

2.When the AM/FM tuner button is pressed, the last station listened to will play.

Note: The desired program source will not play

unless it and the selected signal button coincide

with the active program source signal input.

Volume Control

The volume may be adjusted by either turning the large volume knob on the front panel or using the appropriate volume button on the remote control.

Mute

Pressing the MUTE button temporarily mutes every speaker. To resume audio, press MUTE button again.

SLOW

Image 14
Contents DVD6040 Protect Yourself PrecautionsIndustry Canada Requirement Technical Specifications Trouble Shooting Jpeg FilesTo play a MP3 disc Files Menu of Mp3 play About Your DVD PlayerMP3 Function DRC Setting System Setup USE of DiscsPink Noise Setting Lpcm 48k DS SettingFront and Back Panels System Setup Remote Controller Audio SetupOperating Remote Control Video SetupConnecting Devices Language Video Audio More Aud RatingHints Arrangement Speakers System SetupRear or surround sound speakers Subwoofer speakerMenu MENU/PBC Connecting SpeakersFunctions Connecting Antenna Locating a TitleConnecting Power Supply Basic DVD OperationPlaying the Radio