Playing the Radio

	VOLUME
DVD/CD/MP3/HDCD/CD-R/CD-RW
DOWN	UP
DVD6040 DVD HOME THEATER

OPEN/CLOSEMUTE

DVD	TUNER AUX 1	AUX 2
N/P	SUBTITLE LANGUAGE	ANGLE

+10			TIME
	PROG CH LEVEL
TITLE
	DISPLAY	SLOW	VOLUME
MENU
FM MODE			PRE/TUN
	ENTER
SETUP			REPEAT
PROLOGIC	STEP	ZOOM	RESUME
STOP	PAUSE	PLAY	A-B
MEMO	AUTO	DOWN	UP

DVD6040

BASIC DVD

OPERATION

Once the unit is connected to a television

set and any other accessory equipment, you

are ready to enjoy the excitement of DVD videos

or your favorite CDs and MP3 files.

To play a DVD video disc:

Turn on the TV and select the A/V mode. If the set features an SCART connection, be sure the SCART mode is selected from the TV menu. Turn on amplifier, if connected. Select AC-3 or DVD mode.

To play an audio disc:

Turn on the audio system and choose the input source that is connected to the DVD player. Set the SPDIF OUTPUT to SPDIF OFF from the SETUP MENU display if you don't have the proper equipment for Dolby Digital surround

Once it has read the disc, the unit automati- cally will begin playback. When playing a DVD, the DVD title or menu will appear. CD tracks are played in sequence.

Note:

It is possible to damage a disc if it is not placed correctly on the guides in the disc tray. This may also cause the DVD player to malfunction. Do not force or place anything other than a 5" DVD or CD onto the disc tray.

Never move the DVD player during playback,

as this may cause damage to the disc as well as the player. To open and close the disc tray, only use the OPEN/CLOSE key found on both the remote control and on the unit's front panel.

PLAY

Positioning

1.Press TUNER button to select desired wave

band (AM or FM).

2.Press UP or DOWN button to find a station.

Automatic Tuning

This unit will store up to 50 individual AM or

50 individual FM radio stations in its memory.

sound.

1.Press the POWER key on front panel. DISC LOADING appears on screen.

REMOTE CONTROL

FRONT PANEL

PLAY

14	The frequency will change with each press.
	When a station's signal is received, it will
	appear in the display.
	3.To lock on to a station quickly, hold the UP
	or DOWN button for two seconds. The unit
	will start automatic tuning. When a station
	is found, automatic tuning stops.
	4.To add a station to memory, press the MEMO
	button. The memory storage number will
	blink for four seconds in the display. Press
	MEMO again to store the station.
		Memory number


		Wave band Station frequency

5.To reduce noise when an FM-stereo program has been received, press the FM button. The word STEREO will disappear from the display. The program is now heard in monographic form, reducing the noise. To resume stereo play, press the FM button again.

1.Press the AUTO button. The word AUTO will appear in the display and the automatic tuning mode is activated.

2.Stations will be stored in ascending order until 50 stations of that particular wave band have been saved. When a station is stored, the memory storage number, as well as the station's frequency, will flash for four seconds in the display.

3.When the total number of stations reaches 50, in a particular wave's (AM or FM) memory,

no further station in that wave band will be saved.