TTE Technology L22HD32D owner manual TV operation, Adding Channel, Add/Delete channel, Clear All

NOTE:

•Memorizing channels is best accomplished during evening “PRIMETIME” hours, as more stations are broadcasting digital signals. Memorizing channels can only be accomplished while a station is broadcasting a digital signal to set that channel into memory.

•If you are unsure of the digital channels available in your area, you may visit www.antennaweb.org to receive a list based on your address or zip code.

•New digital channels may be added to your area periodically, it is recommended to perform the “Automatic Search” procedure regularly.

Adding Channel

If you find a new channel unregistered, you can add the new channel into the channel memory.

1Tune in the new channel.

2Press SETUP/TV MENU in the TV mode. The TV menu screen will appear.

3	Press			or	to select “Channel”, then press or
	ENTER.
4	Press			or	to select “Add/Delete”, then press
	or ENTER.
		Add/Delete
			Adding Channel		>>
			Add/Delete		>>
			Clear All		>>
			: Select		ENTER:Set
5	Press			or	to select “Adding Channel”, then
	press			or ENTER. The new channel will be

added into the channel memory.

6Press EXIT/CANCEL to return to the normal screen.

Add/Delete channel

You can select the channel that you want to skip.

1Press SETUP/TV MENU in the TV mode. The TV menu screen will appear.

2	Press		or	to select “Channel”, then press or
	ENTER.
3	Press		or	to select “Add/Delete”, then press
		or ENTER.
4	Press		or	to select “Add/Delete”, then press
		or ENTER.
5	Press		or	to select the channel that you want
	to skip.
		Add/Delete
		CH	Signal
		2	Analog	Add
		3	Analog	Add
		3-001	Digital	Delete
		3-002	Digital	Add
		4	Analog	Delete
		: Select	: Adjust
6	Press		or	to select “Add” or “Delete”,

whichever function you want to perform.

7Repeat steps 5 - 6 for other channels you want to add or delete.

16

51H0101A_eng.indd 16

8Press EXIT/CANCEL to return to the normal screen.

Clear All

All channels are deleted from the channel memory.

1Press SETUP/TV MENU in the TV mode. The TV menu screen will appear.

2	Press			or	to select “Channel”, then press	or
	ENTER.
3	Press			or	to select “Add/Delete”, then press
	or ENTER.
4	Press			or	to select “Clear All”, then press	or
	ENTER.
		Add/Delete
			Adding Channel		>>
			Add/Delete		>>
			Clear All		>>

: SelectENTER:Set

5Press EXIT/CANCEL to return to the normal screen.

TV operation

1To turn on the TV, press POWER. (POWER indicator on the front of the unit changes green. It may take approx. 10 seconds for a picture to appear on screen.)

2Adjust the volume level by pressing VOL + or – . The volume level will be indicated on the screen by blue bars. As the volume level increases, so do the number of bars. If the volume decreases, the number of blue bars also decreases.

3Set the Signal Type option to the appropriate position (see “Air/Cable selection” on page 15).

4Press the Direct Channel Selection (0-9, –) buttons to select the channel.

(If you press only channel number, channel selection will be delayed for a few seconds.)

TO SELECT ANALOG CHANNELS

1-9: Press 1-9 as needed. Example, to select channel 2, press 2.

10-99: Press the 2 digits in order. Example, to select channel 12, press 1, 2.

100-125: Press the 3 digits in order. Example, to select channel 120, press 1, 2, 0.

TO SELECT DIGITAL CHANNELS

Press the first 3 digits, then press the – button, followed by the remaining number.

Example, to select channel 015-001, press 0, 1, 5, –, 0, 0, 1.

•If a channel is selected with only audio content, “Audio only” will be displayed on the screen.

•If a channel is selected with a weak digital signal, “Digital channel signal strength is low” will be displayed on the screen.

The same program may be available on either an analog channel or a digital channel.You may choose to watch either format.

•If a channel is selected to which you have not subscribed, “Digital channel is encrypted” will be displayed on the screen.

08.3.7 5:39:15 PM