Playback procedure, Special playback | TTE Technology L22HD32D

Playback procedure

1Press TV/DVD to select DVD mode.

2Place the disc in the

disc slot with the label side facing forward. (If the disc has a label.)

Hold the disc without touching either of its surfaces, align it with the guides, and place it in position.

3On the screen, “ ” changes to “Reading” and then playback will commence.

• A menu screen may appear on the TV screen,

if the disc has a menu feature. In this case, press , , , or ENTER to operate a menu feature.

Reading

4Press STOP to end playback.

•The unit memorizes the stopped point, depending on the disc. “” appears on the screen. Press PLAY to resume playback (from the scene point).

•If you press STOP again (“ ” appears on the screen) or unload the disc, the unit will clear the stopped point.

5Press (EJECT).

Remove the disc and then press POWER. The unit turns off.

When you eject the disc, you may hear mechanism noise, but it is not malfunction.

NOTE:

•If a non-compatible disc is loaded, “Incorrect Disc”, “Region Code Error” or “Parental Error” will appear on the TV screen according to the type of loaded disc. If these appear, check your disc again (see pages 8 and 33~34).

•Some discs may take a minute or so to start playback.

•If an 8 cm disc is placed into the disc slot and picture playback or menu display does not begin automatically, press PLAY.

•A “Prohibition” symbol “” may appear at the upper right of the screen. This symbol means either the feature you tried is not available on the disc, or the unit cannot access the feature at this time. This does not indicate a problem with the unit.

•If you place a single-faced disc label backwards (i.e. the wrong way) “Reading” will appear in the display and then “Incorrect Disc” will be displayed.

•Some playback operations of DVDs may be intentionally fixed by software producers. Since this unit plays DVDs according to the disc content recorded, some playback features may not be available. Also refer to the instructions supplied with the DVDs.

Special playback

Fast Forward Playback

Press SEARCHduring normal playback.

Each press of SEARCH will increase the speed of

the search(x 2),(x 4),(x 8),(x 15).

(CD:(x 2),(x 4),(x 8),(x 20))

• To resume normal playback, press PLAY.

Review Playback

Press SEARCHduring normal playback.

Each press of SEARCH will increase the speed

of the search(x 2),(x 4),(x 8), (x 15).

(CD:(x 2),(x 4),(x 8),(x 20))

• To resume normal playback, press PLAY.

Still Playback

Press PAUSE/STILL during normal playback to pause playback.

• To resume normal playback, press PLAY.

Frame Advance

Press PAUSE/STILL during still playback.

One frame is advanced each time you press PAUSE/ STILL.

• To resume normal playback, press PLAY.

Slow-motion Playback

Press SLOWReverse or SLOWForward during normal playback or still playback.

Each press of SLOW will change the speed of the slow x1/2, x1/4, x1/6, x1/7.

•To resume normal playback, press PLAY.

•To resume the still playback, press PAUSE/STILL.

Locating a chapter or track

Press SKIP Forward or SKIP Reverse during playback to locate a chapter that you want to watch. Each time you press the button, a chapter or track is skipped.

NOTE:

•The unit is capable of holding a still video image or On screen display image on your television screen indefinitely. If you leave the still video image or On screen display image displayed on your TV for an extended period of time, you risk permanent damage to your television screen.

•There may be a slight delay between when you press the button and the function activating.

51H0101A_eng.indd 26

08.3.7 5:39:19 PM