TTE Technology L22HD32D owner manual Labeling video inputs, To clear a Ch Label, To set the V-Chip

“ ” appears instead of the number.

[0-9] : Select

ENTER:Set

Setting the V-Chip

An age limitation can be set to restrict children from viewing or hearing violent scenes or pictures that you may choose to exclude. The restriction applies to “TV Rating” and “Movie Rating” if this data is transmitted. You may set this restriction separately. To use the V-Chip function, you must register a password.

To register a password

3 Press				or	to select “Ch Label”, then press
	or ENTER.
	The “Ch Label” menu will appear.
4 Press				or	to select a channel you want to
	label, then press .
		Ch Label
			Channel Number		15-1
			Ch Label
			Label Clear		>>
			: Select	: Adjust
5 Press				or	repeatedly until the character you
	want appears in the first space.
		Ch Label
			Channel Number		15-1
			Ch Label		A
			Label Clear		>>
			: Select	: Adjust	ENTER:Set

The characters rotation as follows:

-	, () @ / + = -
SPACE

If the character which you desire appears, press

ENTER.

Repeat this step to enter the rest of the characters.

If you would like a blank space in the label name, you must choose the empty space from the list of characters.

6When you finish inputting the label name, press EXIT/CANCEL to return to the normal screen.

7Repeat steps 4-5 for other channel.You can assign a label to each channel.

To clear a Ch Label

After step 4 above, press or to select “Label Clear”, then press or ENTER.

NOTE:

•The channel labels will be reset after “Automatic Search” on page 15.

Labeling video inputs

The Video Label feature allows you to label each input source for your TV.

1Press SETUP/TV MENU in the TV mode. The TV menu screen will appear.

2	Press	or	to select “Setup”, then press or
	ENTER.
3	Press	or	to select “Video Label”, then press
	or ENTER.
4	Press	or	to select an input which you want to
	label.
5	Press	or	to select the desired label for that

input source.

18

51H0101A_eng.indd 18

Video Label

Video-

Component-

HDMI-

: Select : Adjust

–: Uses the default label name VCR : Video cassette recorder DVD : DVD video

DTV : Digital TV set-top box

SAT : Satellite box

CBL : Cable box

HD : HDMI device (only for HDMI inputs)

6Press EXIT/CANCEL to return to the normal screen.

1	Press SETUP/TV MENU in the TV mode. The TV
	menu screen will appear.
2	Press		or to select “Lock”, then press or
	ENTER.
3	Select and enter your password (4 digits) using
	Number buttons (0-9), then press ENTER.
		Lock
		New Password	* * *_

4Enter the same password again to confirm, then press ENTER.

The password is now registered.

NOTE:

•If you forget your password, you can reset it. Turn the volume all the way down using VOLUME – on the TV. Continue holding the button and press 0 on the remote control at the same time for about 5 seconds. Enter a new password.

•To avoid forgetting the password, write it down and keep in a safe place.

To set the V-Chip

1Press SETUP/TV MENU in the TV mode. The TV menu screen will appear.

2 Press or to select “Lock” menu, then press or ENTER.

3Use Number buttons (0-9) to enter your password, then press ENTER. Then Lock menu will appear.

08.3.7 5:39:16 PM