Sharp LC-22AA1M Sound volume, Changing channels, Using 0 9 on the remote control unit

Basic operation

Control panel of the

main unit

VOL CH MENU TV/VIDEO MAIN POWER

VOL (l)/(k)

CH (s)/(r)

Sound volume

To adjust the volume

Press ikto increase the sound volume. The bar indicator shifts right.

Press ilto decrease the sound volume. The bar indicator shifts left.

Volume 42

Volume 5

To mute the sound

Press e (Mute) to temporarily turn off the sound. “Sound off” is displayed.

Press e (Mute) to turn off the Mute function. “Sound on” is displayed.

NOTE

•When i (k/l) is pressed in the Mute mode, the sound turns on and the volume indicator is displayed.

•The Mute function is cancelled when B is pressed.

S o u n d o f f

S o u n d o n

Changing channels

You can select channels using 0 – 9 or CH a/b.

•To handle the increasing number of channels available, this LCD TV set allows you to select up to 100 channels (0 to 99).

Using 0 – 9 on the remote control unit

Select the channels directly by pressing buttons 0 – 9.

a

To select a 1-digit channel (e.g. channel 2):

•Press 2. If “2” is indicated and the picture does not change, press o to switch over to the 1-digit select mode and press 2 again.

To select a 2-digit channel (e.g. channel 12):

•Press oto set the 2-digit select mode. Press 1, followed by 2.

Using CH a/b

Press CH aand the channels change in the order shown below: 1 → 2 → 3 → . . . → 98 → 99 → 0 → 1 → 2 → 3 → . . .

Press CH band the channels change in the order shown below: 3 → 2 → 1 → 0 → 99 → 98 → . . . → 3 → 2 → 1 → . . .

NOTE

•Channel “0” is reserved for RF output of VCR.

•Complete this procedure within 3 seconds, otherwise the selection will not be made on the 2- digit channel mode.

When viewing Teletext information

View a page directly which is 3-digit page number from 100 to 899 by pressing buttons 0 – 9. With Teletext, you do not use o. (See page 31).

Using Flashback (A) on the remote control unit

Press A to switch the currently tuned channel to the previously tuned channel. Press A again to switch back to the currently tuned channel.

12