Sharp LC-22AA1M AV connections, Example when AV1 is, Example when AV2 is Selected

Useful features

AV connections

It is possible to manually adjust various settings for connections with external devices on the “AV connections” screen.

[1] AV1/AV2/AV3/COMPONENT

Select the appropriate signal type and colour standard for the signals from the video equipment connected to the AV1, AV2, AV3 or COMPONENT terminal.

1 Press MENU to display the TV menu.

2 Press a/bto select “AV connections”, and then press ENTER.

3	Press a/bto select “AV1”, “AV2”, “AV3”, or
	“COMPONENT”, and then press ENTER.

TV menu

Picture

Audio

Preset

Features

AV connections

First installation Language

R Back M End

AV connections

AV1

AV2

AV3

COMPONENT

R Back M End

4	Press a/bto select the desired item, and		Example when AV1 is
	then press ENTER.			selected:
		AV1
			Signal type		[ CVBS]
		AFC			[Mode1]
		Colour system			[ Auto]
				R Back	M End

5	Press c/dto select the desired “Signal type”,
	“AFC” and “Colour system”, and then press
	ENTER.
6	Press MENU to exit.

Example when AV2 is

selected:

AV2
AFC	[Mode1]
Colour system	[ Auto]

R Back M End

Adjustment item	Choice/Input value	Description
Signal type(*1)	Auto, CVBS, Y/C	To select the signal type of external equipment.
AFC	Mode1, Mode2	To select frequency control modes. Mode1 is suitable for DVD players
		or decoders, and Mode2 is suitable for VCRs or Camcorders.
	Auto, PAL, SECAM,
Colour system(*2)	N358 (NTSC 3.58),	Colour norm
	N443 (NTSC 4.43),
	PAL60

(*1) “Signal type” is only visible when the AV1 is selected.

(*2) You can only select “Auto”, “PAL”, “N358”, “N443” in “Colour system” when COMPONENT is selected.

NOTE

•If no (colour) image displays, try to change to a different signal type.

•Depending on the compatibility with the various types of equipment, the picture may become skewed. In this case, select the “AFC” (Automatic Frequency Control) mode that will improve the picture.

•Switching between AV input signals may be slow, depending on the settings in “Colour system”. If you want to speed up signal switching, switch “Auto” in “Colour System” to the current reception colour system.

24