Useful features
Selecting speakers
You can output audio using the supplied speakers (detachable) or other external speak- ers.
1 Press MENU to display the TV menu.
2 Press a/bto select “Features”, and then press ENTER.
3 Press a/bto select “Speaker”, and then press ENTER.
4 Press c/dto select “Detachable” or “External”, and then press ENTER.
5 Press MENU to exit.
TV menu
Picture
Audio
Preset
Features
AV connections
First installation
Language
|
| R | Back | M | End |
|
|
|
|
|
|
|
|
|
|
|
|
| Features |
| [bright] | ||
| Brightness |
| |||
Quick shoot |
| [ off] | |||
V.Position |
| [ | 0] | ||
| [ IN3] | ||||
Booster |
| [auto] | |||
Auto power off | [ off] | ||||
Speaker | [Detachable] | ||||
|
|
R Back M End
Connecting external speakers
Rear view
How to connect the
speaker cable
1 Pull up the lid.
2 Insert the edge of the cable.
3 Put the lid back down.
• Bundle the cables of the external speakers with clamps as shown above.
CAUTION
•Make sure external speakers have 4 ohm and 5 watt specifications.
•Connect the plus/minus jacks with the correct cables. Incorrect connection may cause a short.
Make sure to connect the speaker jack and cable polarity (L, +) properly
•The speaker jacks have plus (L) and minus (+) polarity.
•Plus is red and minus is black.
•The cables are also divided into plus and minus.
•When connecting the left/right speakers, be sure to connect the plus/minus jacks with the correct cables.
NOTE
•See page 8 for bundling the cables of the external speakers.
•Unplug the AC cord from the AC outlet before installing the speakers.
•When using the TV with the supplied stand attached, do not remove the speaker. Doing so may disturb the balance leading to product damage or personal injury.
21