8.VCR/TV button– Press to select TV or VCR mode.
VCR position: to view playback, to monitor video recordings or watch TV using the VCR tuner.
TV position: to watch TV or to view one program while recording another.
9.Remote sensor window– Receives the infrared signals from the remote control.
10.Indicators
PWR. (power) indicator– Indicates when the VCR is turned on.
VCR indicator– Indicates when the VCR is in the VCR position.
TAPE IN indicator– Indicates when there is a tape in the VCR.
TIMER indicator– Indicates when the timer record- ing or OTR has been set.
REC indicator– Indicates during recording. Flashes when a recording is paused.
CLOCK indicator– Displays current time. PM indi- cator lits when p.m.
11.TAPE SPEED button– Press to choose the desired recording speed : SP/SLP.
12.CHANNEL Up or Down buttons– Press to select the desired channels for viewing or recording.
Tracking function– Press to minimize video ‘noise’ (lines or dots on screen) during playback (only on the VCR).
Press to stabilize the picture in the Still mode when the picture begins to vibrate vertically.
13.RECORD button– Press for manual recording.
OTR button– Press to activate One Touch Record- ing. (only on the VCR)
14.MENU button– Press to display the menu on the TV screen. Press to exit the menu on the TV screen.
15.NUMBER buttons– Press to select desired channels for viewing or recording. To select channels from 1 to 9, first press "0" button then 1 to 9. (only on the remote control)
+100 button– When selecting cable channels which are higher than 99, press this button first, then press the last two digits. (To select channel 125, first press "+100" button then press "2" and "5"). (only on the remote control)
16.DISPLAY button– Press to display the current time, channel number, real time tape counter, and other in- formation on the TV screen. (only on the remote con- trol)
Each time you press this button, TV screen will change as shown. The status display (STOP, PLAY etc.) and the tape speed display (SP, LP (playback only), or SLP) will disappear after 5 seconds.
<OFF mode> | <COUNT mode> |
| <CLOCK mode> | ||
|
| STOP |
| STOP | 5:40PM |
|
|
|
|
| CH 02 |
| Press | Press |
| ||
| once SP 0:12:34 | once SP |
| ||
Press once
17.COUNTER MEMORY button– Press to set counter memory on and off. (only on the remote control)
18.COUNTER RESET button– Press to reset counter to 0:00:00. (only on the remote control)
EXIT button– Press to exit the menu on the TV screen. (only on the remote control)
19.AUTO REPEAT button– Press to repeat playback automatically. (only on the remote control)
20.Power cord– Connect to a standard AC outlet (120V/60Hz).
21.AUDIO OUT jack– Connect to the audio input jack of your audio equipment or another VCR.
22.AUDIO IN jack– Connect to the audio output jack of your audio equipment or another VCR.
23.ANT. IN terminal– Connect to an antenna, Cable system or Satellite system.
24.VIDEO OUT jack– Connect to the video input jack of your video camera or another VCR.
25.VIDEO IN jack– Connect to the video output jack of your video camera or another VCR.
26.CH3/CH4 selector switch– Use to select a video output channel (3 or 4) for VCR playback.
27.ANT. OUT terminal– Connects to the antenna input terminal on your TV.
INSTALLING THE BATTERY
Make sure the polarity of battery to install to the remote control unit.
Install 2 X AA battery
INDICATORS
PWR. (power) indicator
Indicador de alimentació n
TAPE IN indicator 
Indicador de videocasete introducido
VCR indicator
Indicador de videograbadora
REC (record) indicator
Indicador de grabació n (REC)
TIMER indicato
Indicador del temporizador
PM indicator
Indicador del tarde (PM)
CLOCK indicator / Indicador del reloj
- 5 - | EN |
0J11