Technika STBHDV2010 user manual Active channels, Scan Encrypted, Output Settings

Page 13

Active channels

You can select broadcasts to be listed in the channel list. To display specic types of broadcast, you should use Active channel list setting.

Select Active Channels by using “”/“” button.

You can select a broadcast type option from the list by using “”/“” button. Available modes are: TV Only, Radio Only, Text Only, Favourites or Show All (if available).

Press the MENU button to save the recent changes and exit.

Scan Encrypted

When this setting is on, search process will locate the encrypted channels as well. If it is set as Off, encrypted channels will not be located in automatic search or manual search.

Use“”/“” buttons to highlight Scan Encrypted and press “”/“” buttons to select YES or NO.

Output Settings

TV Type

Digital terrestrial television channels can be broadcast in a widescreen format which must be output differently to normal and widescreen TV sets.

This function defines the screen format of the connected TV to enable broadcasts’ being displayed correctly.

Select 4:3 if you have a standard TV set with 4:3 aspect ratio.

Select 16:9 if you have a widescreen TV.

If you select Auto, TV type will be set automatically according to the broadcast.

Note: This function also enables you to change TV Type that you have previously selected during the rst time installation.

TV Out

The set-top-box can output RGB and CVBS signal via the TV SCART connector located on the rear panel.

Although the RGB format provides a better picture quality, some devices might not support it.

AC3 Audio

Highlight the AC3 Audio item by pressing “”/“ ” buttons. Use the “”/“” buttons to set the AC3 Audio as On or Off.

If the channel that you are watching supports AC3 Audio, you can turn this setting on.

SPDIF Delay

You can use this setting when there is an SPDIF synchronization problem in the received broadcast. Press the “” or “” butto to change the delay.

Digital Audio

Use this setting to dene digital audio out signal type.

Use “” or “” buttons to set Digital Audio as Bitstream or PCM.

If your selected channel includes compressed sound stream, you can connect your set-top box to an external equipment by using digital audio out of your set-top box for enabling the sound output.

If you have no external sound equipment, please select Digital Audio Out as PCM by using “” or “ ” button.

HDMI Resolution

This setting enables you to change HDMI resolution as 576P, 720P, 1080i or 1080P.

Use “”/ “” button on the remote control to change resolution and press GREEN button to apply.

HDMI HDCP

In the Conguration menu, highlight the HDMI HDCP item by pressing “” or “” buttons.

Use the “” or “” button to set the HDMI HDCP as On or Off.

English - 12 -

Image 13
Contents STBHDV2010 Contents Accessories FeaturesSafety Precautions IntroductionSafe use and care of your equipment Important Safety informationOverview of the Remote Control Front Panel Rear Panel Viewing Controls and Connections of the Set-Top-BoxConnecting the Set-Top Box to a TV Set Inserting Batteries in the Remote ControlPower On-Off Power ConnectionAntenna Connection Adjusting the Volume First Time InstallationChanging Channels MuteMenu System On-Screen InformationManaging Stations Channel List Operating the Channel List Setting FavouritesMoving a Channel Deleting ChannelsViewing Electronic Programme Guide EPG Conguring Settings Setup MenuEvent Options CongurationActive channels Output SettingsScan Encrypted Parental Settings Receiver UpgradeLow Power Audio DescriptionInstallation IP SettingsConguring Language Preferences OSD Warning Messages No SignalDisplaying Text No Channels Have Been Added YetBattery TroubleshootingProblem Possible Reasons What To Do Remote Control General CharacteristicsHardware Conguration Digital CapabilitiesDigital Audio AudioData In / Out Tv ScartFollowing information is only for EU-member states