Technika STBHDV2010 user manual Troubleshooting, Battery, Problem Possible Reasons What To Do

Page 17

Troubleshooting

	Problem	Possible Reasons	What To Do

	The LED indicator does not	Power Adaptor is not connected.	Check if the mains cable is
	glow.		plugged into the power socket.

	No picture or sound.	No signal or weak signal.	Check the aerial and video
	No picture or sound.	No signal or weak signal.	connections (scart/HDMI).
			connections (scart/HDMI).

	Changes in the settings have not	The set-top-box was unplugged	Make sure that the box is in
	Changes in the settings have not	without rst switching to standby	standby mode before unplugging
	taken effect.	mode.	it from the mains.
		mode.	it from the mains.

		• The set-top-box is in standby.	• Press the STANDBY button.
	The remote control is not	• The set-top-box is in standby.	• Check that the remote control
			• Check that the remote control
		• Remote control is out of range.	range is clear.
	working.	• Batteries are exhausted.	• Replace the batteries with new
		• Batteries are exhausted.	• Replace the batteries with new
			ones.

	Password is forgotten.		Contact the Tesco Electrical
	Password is forgotten.		Helpdesk.
			Helpdesk.

Battery

Information for Users on Disposal of Old Equipment and Batteries [European Union only]

These symbols indicate that equipment with these symbols should not be disposed of as general household waste. If you want to dispose of the product or battery, please consider the collection systems or facilities for appropriate recycling.

Notice: The sign Pb below the symbol for batteries indicates that this battery contains lead

English - 16 -

Image 17

Contents STBHDV2010 Contents Accessories FeaturesSafety Precautions IntroductionSafe use and care of your equipment Important Safety informationOverview of the Remote Control Front Panel Rear Panel Viewing Controls and Connections of the Set-Top-BoxConnecting the Set-Top Box to a TV Set Inserting Batteries in the Remote ControlAntenna Connection Power ConnectionPower On-Off Adjusting the Volume First Time InstallationChanging Channels MuteManaging Stations Channel List On-Screen InformationMenu System Operating the Channel List Setting FavouritesMoving a Channel Deleting ChannelsViewing Electronic Programme Guide EPG Conguring Settings Setup MenuEvent Options CongurationScan Encrypted Output SettingsActive channels Parental Settings Receiver UpgradeLow Power Audio DescriptionConguring Language Preferences IP SettingsInstallation OSD Warning Messages No SignalDisplaying Text No Channels Have Been Added YetProblem Possible Reasons What To Do TroubleshootingBattery Remote Control General CharacteristicsHardware Conguration Digital CapabilitiesDigital Audio AudioData In / Out Tv ScartFollowing information is only for EU-member states