NOTES
POWER: The receiver should be plugged into a 220- 240 V AC 50Hz supply only.
LEADS: Ensure the power supply lead, and all other leads, are positioned so they are not likely to be walked on or pinched by things placed on or against them. Pay particular attention to the power lead, where it enters the mains plug and where it comes out of the receiver. Do not connect or adjust leads when the receiver is plugged in.
TEMPERATURE AND MOISTURE: Do not leave or use the receiver in a hot, cold or humid area. Do not allow the receiver to get wet - from drips or splashes
-as this may be dangerous. Do not place
VENTILATION: Slots and openings in the receiver’s cover are for ventilation. Do not cover or block them as this could lead to overheating.
CLEANING: Unplug the receiver before it is cleaned. Use a lightly dampened cloth only. Do not use liquid or aerosol cleaners.
HEAT AND FLAMES: The receiver should not be placed near to naked flames or sources of intense heat, such as an electric fire. Ensure that no naked flames sources, such as lighted candles, are placed on top of the Receiver.
LIGHTNING: Unplug your receiver from the wall socket if there is a storm or lightning, or if it is to be unused for a long time.
REPLACEMENT PARTS: If your receiver needs a replacement part, ensure the person undertaking the repair uses parts which are specified by the manufacturer or have the same specifications as the original part. Other parts may cause a fire, electric shock or other hazards.
BATTERY DISPOSAL: Please ensure that exhausted batteries from the remote control handset are disposed of safely.
SERVICING: Ensure the person who services your receiver is qualified to do so. Do not remove the cover yourself you could get an electricshock.We are proud to offer a