Sharp 27N S180, 27N S100, 25N S100 To change the V-CHIP Block setting. Secret No. is registered

Parent Control (V-CHIP Operation Continued)

L To change the V-CHIP BLOCK setting. (Secret No. is registered.)

1 Repeat steps 1 - 3 of [1] MPAA RATING, then “INPUT SECRET No.” will be displayed.

2Enter the 4-digit SECRET No. using the REMOTE KEYPAD and the V-CHIP select mode will be displayed. Repeat

configuration of the V-CHIP BLOCK.

L If you intend to change or have forgotten your Secret No., clear the original Secret No. and set up a new one.

1 Repeat steps 1 - 3 of [1] MPAA RATING, or 1 - 2 of [ L To cancel the V-CHIP BLOCK screen while V-CHIP BLOCK has been activated ], then “INPUT SECRET No.” will be displayed.

2 Press and hold both VOL (+) and CH DOWN (9) on the TV set simultaneously until the message “INPUT SECRET No.” disappears.

(On the set)

- VOL + CH

9 8

VOL(+) / CH DOWN(9)

3 Press MENU two times to exit.

[3]-A. Additional mode (DOWNLOAD)

There will be an additional new rating system. In that case, please set up as follows. Subsequently the new rating system will set up automatically.

1

2

Repeat steps 1 - 3 of [1] MPAA RATING.

Press CH UP (8) or DOWN (9) to move the “ ” mark to “DOWNLOAD”.

3 Press VOL (+) or (–)to “DOWNLOAD : ON”.

4 Repeat pressing MENU to exit.

21

19-25 25&27NS100/180 1.4 21 6/1/00, 2:09 PM