Sharp 27N S180, 27N S100, 25N S100 warranty Using the Audio Output Jacks 25N-S180 and 27N-S180 only

Page 33
(AUDIO OUTPUT JACKS are located on the rear of the cabinet.)
CONNECTIONS
(Rear connection
terminals of TV)

Using the Video and Audio Input Jacks (Continued)

LTo watch video material playback.

•Press the Remote’s INPUT to select VIDEO INPUT mode to which the video equipment you want to

playback is connected.

• The external VIDEO INPUT mode will change as follows each time the INPUT is pressed.

•INPUT mode can be selected by pressing either the CH UP (8) on the TV remote control when the TV is set to the highest channel stored in memory, or by pressing the CH DOWN (9) when it is set to the lowest channel.

NOTE:

•When connecting video or audio equipment to the television, be sure that the power is turned off in order to prevent damage to either the television or the equipment being connected.

•The S-VIDEO terminal has priority over a VIDEO terminal (IN-1). When you want to watch pictures from video equipment connected to a VIDEO terminal, unplug equipment connected to the corresponding S-VIDEO terminal.

•It is the intent of SHARP that this product be used in full compliance with the copyright law and that prior permission be obtained from copyright owners whenever necessary.

•For detailed information on the connection and use of auxiliary equipment, refer to the instruction manuals of the equipment being used.

•The connection cords can be obtained from your local video store.

Using the Audio Output Jacks (25N-S180 and 27N-S180 only)

LThese jacks are used for connecting a standard stereo amplifier. Control of STEREO/MONO/ SAP, VOLUME and MUTE are retained at the TV. These jacks relay the audio signal of all programs being displayed on the TV screen.

(1) Before connecting the cord, turn on the TV and adjust the VOLUME control on the TV for a moderate listening level.

(2) Turn off the TV and connect the audio cord to the AUDIO LINE OUTPUT JACKS on the TV.

(3) Turn the TV set and stereo amplifier on.

(4) If you desire, you can turn off the sound to the TV’s internal speakers by SPEAKER mode. See page 13 - 14.

(5) Adjust the VOLUME control on the stereo amplifier for a moderate listening level.

(6)Control of the audio can be done using the audio controls (STEREO/MONO/SAP, VOLUME, and MUTE), from either the remote control, or directly from the TV set.

NOTE:

•For detailed information on the connection and use of auxiliary equipment, refer to the operation manuals of the equipment being used.

•When connecting monaural equipment to the AUDIO INPUT or OUTPUT of this set, use an audio connection cord and plug adapter as shown below.

•For optimal sound quality, it is recommended to keep the TV’s audio output level high.

 

Plug adapter

To the TV

To the equipment

being connected

 

Pin plug x 2

Pin plug Pin jack/Mini plug

33

32-40 25&27NS100/180 1.4

33

6/1/00, 2:12 PM

Page 32 Page 34
Image 33
Page 32 Page 34
Contents 25N-S100 25N-S180 27N-S100 27N-S180 Second Consumer Product Safety ACT First WarrantyWhat is Energy Star Important InformationImportant Information Important Safeguards NEC National Electrical Code Power Supplied AccessoriesBefore Operating Your Television LocationAntenna Connections AntennasTV set Combination VHF/UHF Quick Reference Control Operation 25N-S100, 25N-S18027N-S100, 27N-S180 Nota Referencia rápida de los controles de operaciónRemarque Référence rapide sur les commandesTo cancel EZ Setup EZ Setup during First Power OnLanguage Demo ModeVideo Adjust Sleep TimerTimer SET mode Description of Adjustment ItemsMTS Multichannel TV Sound Audio SelectClosed Caption HOW to SET Closed CaptionExample If stereo sound is difficult to hearParent Control V-CHIP Operation Mode DataChip Mpaa RatingRating TV Parental GuidelinesExample 2.1 Content- Based setting Example 1.2 Age-Based settingExample 2.2 Content-Based setting Example 3 Reset an Age-Based settingHOW to SET V-CHIP Mpaa Rating Repeat steps 1 3 of 1 Mpaa Rating TV GuidelinesActivate on to Turn on V-CHIP Block To change the V-CHIP Block setting. Secret No. is registered Additional mode Additional mode ExampleParent Control View Timer View TimerStatus ON/OFF setting of View Timer How to set View Timer To change the View Timer settings. Secret No. is registered Energy Save EZ Setup Set UpChannel Setting Saving broadcast TV channels into memory StartStop Blue Screen Use CH UP 8 or Down 9 or RemoteBy setting the Personal Preference channels in advance Personal PreferenceYou can select your favorite channels easily Universal Plus Function To select the Personal Preference channelConnecting video equipment for playback of video material Using the Video and Audio Input JacksConnecting video device equipped with video output terminal VCRTo watch video material playback Using the Audio Output Jacks 25N-S180 and 27N-S180 onlyUniversal Remote Control Operation of Remote ControlUsing Your Remote With Your TV Identifying Remote VCR and Cable TV ConvertersTo Identify Your VCR Search Method HOW to Identify a VCRTips on Identifying Your VCR VCR Brand Remote Control Code NumberCatv Converter Remote Control Brand Code Number To Identify Your Cable Converter Search MethodTips on Identifying Your Cable Converter Calling for Service Before Calling for ServiceProblem Possible RemedyAntes de llamar al servicio de reparaciones ProblemaPosible Solución X X X X X X X XConsumer Limited Warranty Limited Warranty
Top Page Image Contents