Sharp 25N S100, 27N S100, 27N S180 By setting the Personal Preference channels in advance

Set Up (Continued)

6 Press MENU to exit.

NOTE:

•Poor reception due to weak signals, or too much noise might activate the BLUE SCREEN function despite the presence of a broadcast signal. To continue watching TV under these conditions, switch the BLUE SCREEN “OFF”.

•While VCR input mode is selected, the BLUE SCREEN will not be shown on your TV even if the BLUE SCREEN is turned on.

L PERSONAL PREFERENCE	REMOTE
By setting the PERSONAL PREFERENCE channels in advance,
	KEYPAD
you can select your favorite channels easily.	VOLUME
	(+)/(–)
PERSONAL	CHANNEL
PREFERENCE
	UP (8)/
	DOWN (9)
	MENU

1 Press MENU to access MAIN MENU screen.

2 Press CH UP (8) or DOWN (9) to move the “ ” mark to “SET UP”.

→

(MAIN MENU screen)

3 Press VOL (+) or (–)to access SETUP mode, then press CH UP (8) or DOWN (9) to move the “ ” mark to “PERSONAL PREFERENCE”.

→

(SETUP mode)

4 Press VOL (+) or (–)to select PERSONAL PREFERENCE select mode in which you can program four favorite channels, in four different categories. (total of 16 channels)

(PERSONAL PREFERENCE select mode)

5 Press CH UP (8) or DOWN (9) to move the “ ” mark to the desired position.

6 Press REMOTE KEYPAD on the Remote to input the CHANNEL Number into the memory.

Example:

125 — Press “100” followed by “2” and then “5”.

7 Repeat steps 4 - 6 to input the next CHANNEL Number.

30

26-31 25&27NS100/180 1.4 30 6/1/00, 2:11 PM