Sharp 27N S300, 36N S400, 32N S400 warranty Energy Save, On the set

Parent Control (VIEW TIMER Continued)

2 Press and hold both VOL (+) and CH DOWN (9) on the TV set	(On the set)
	- VOL +	9 CH 8
simultaneously until the VIEW TIMER access screen is displayed.

Now you can cancel the VIEW TIMER settings or can change the

SECRET No. while “INPUT SECRET No.” is displayed.

VOL(+) / CH DOWN(9)

L Notice of Remaining VIEWING TIME

•For every 30 minute interval, the “remaining time” will be displayed for four seconds. For the last five minutes, the “remaining time” will be displayed every minute.

•“0 REMAIN” will be displayed for 10 seconds just before the VIEWING TIME is completed.

Energy Save

LThis feature lets you lower the power consumption of your TV set which in turn saves you money and minimizes the impact on the environment. When this feature is turned on, it reduces the brightness of the TV to a level that consumes approximately 20 percent less energy than when the feature is turned off. The reduction in brightness will be less noticeable under low room lighting conditions.

VOLUME (+)/(–)

CHANNEL UP (8)/ DOWN (9)

MENU

1

2

Press MENU to access MAIN MENU screen.

Press CH UP (8) or DOWN (9) to move the “” mark to “ENERGY SAVE”.

→

(MAIN MENU screen)

3 Press VOL (+) or (–)to access ENERGY SAVE select mode.

(ENERGY SAVE select mode)

4 Press VOL (+) or (–)to select “ON”.

5 Press MENU to exit.

25

19-25 27NS300/32/36NS400 1.1 25 5/31/00, 8:11 AM