Sharp 27N S300, 36N S400, 32N S400 HOW to Identify a VCR, To Identify Your VCR Search Method

Page 37

Operation of Remote Control (Continued)

REMOTE

KEYPAD

VCR

POWER

DISPLAY

CHANNEL UP (8)/ DOWN (9)

TV-CATV

LHOW TO IDENTIFY A VCR

The remote control may already be set to operate your VCR. Try this initial check to see if going on to the following “identify” section is necessary.

(1)Point remote towards VCR and press VCR POWER.

(2)Does the remote turn the VCR ON and OFF?

•If yes, the remote is ready to operate the VCR and no further steps are needed.

•If no, continue to the “identify” section.

LTo Identify Your VCR – Direct Entry Method. Use the following steps and list to quickly find the remote control code for your accessory VCR.

•First look up your VCR’s remote control code number before going through the direct code entry steps control.

•If this procedure does not identify your accessory VCR, use the Search method of identification (described in the next section).

(1)Slide TV-CATVswitch to TV.

(2)Press and hold down DISPLAY and CH DOWN (9) on your remote control. Then release both buttons.

(3)Within ten seconds after releasing DISPLAY and CH DOWN (9), enter your VCR’s two- digit remote control code number using REMOTE KEYPAD (refer to list).

•The remote control is now ready to send commands to your VCR.

Some brands have more than one remote code listed due to changes in the remote codes from early to later model years, or due to format differences (VHS/BETA). In such cases, you may have to try more than one code to find the code your VCR accepts.

NOTE:

Depending on the model, year produced, brand, and type of VCR, some models may not be compatible with the remote control.

LTo Identify Your VCR – Search Method.

(1)Slide TV-CATVswitch on the remote to TV.

(2)Press POWER on the VCR to ON.

(3)Stand at least six feet away from the front of the VCR.

Point the remote towards the VCR.

Hold down DISPLAY and CH UP (8) at the same time. KEEP HOLDING THE BUTTONS DOWN.

(4)Watch the Channel Number indicator on the VCR, Channel numbers will scan up when the VCR has been identified.

Release DISPLAY and CH UP (8) as soon as the channel numbers start to scan up. The VCR’s remote control code number has been identified, and the remote is ready to operate the VCR.

37

32-48 27NS300/32/36NS400 1.1

37

5/31/00, 8:26 AM

Page 36 Page 38
Image 37
Page 36 Page 38
Contents 27N-S300 32N-S400 36N-S400 Second Consumer Product Safety ACT First WarrantyWhat is Energy Star Important InformationImportant Information Important Safeguards NEC National Electrical Code Before Operating Your Television Supplied AccessoriesAntenna Connections Separate VHF/UHF Combination VHF/UHF32N-S400 and 36N-S400 models only Combination VHF/UHF 27N-S300 Quick Reference Control Operation32N-S400, 36N-S400 Nota Referencia rápida de los controles de operaciónRemarque Référence rapide sur les commandesTo cancel EZ Setup EZ Setup during First Power OnLanguage Demo ModeVideo Adjust Sleep TimerTimer SET mode Description of Adjustment ItemsAudio Select Internal Speaker SwitchMTS Multichannel TV Sound Closed Caption HOW to SET Closed CaptionExample If stereo sound is difficult to hearParent Control V-CHIP Operation Mode DataChip Mpaa RatingRating TV Parental GuidelinesExample 2.1 Content- Based setting Example 1.2 Age-Based settingExample 2.2 Content-Based setting Example 3 Reset an Age-Based settingHOW to SET V-CHIP Mpaa Rating Repeat steps 1 3 of 1 Mpaa Rating TV GuidelinesActivate on to Turn on V-CHIP Block To change the V-CHIP Block setting. Secret No. is registered Additional mode Additional mode ExampleView Timer Parent Control View TimerStatus ON/OFF setting of View Timer How to set View Timer To change the View Timer settings. Secret No. is registered On the set Energy SaveEZ Setup Set UpChannel Setting Start Saving broadcast TV channels into memoryStop Blue Screen Use CH UP 8 or Down 9 or RemotePersonal Preference By setting the Personal Preference channels in advanceYou can select your favorite channels easily Universal Plus Function To select the Personal Preference channelPIP Picture In Picture Freeze-Frame Inset Pictures To Move the Inset PicturePIP is on and Insert Picture is blocked Connecting video equipment for playback of video material Using the Video and Audio Input JacksConnecting video device equipped with video output terminal To watch video material playbackUsing the Audio Output Jacks Universal Remote Control Operation of Remote ControlUsing Your Remote With Your TV Identifying Remote VCR and Cable TV ConvertersTo Identify Your VCR Search Method HOW to Identify a VCRTips on Identifying Your VCR VCR Brand Remote Control Code NumberTo Identify Your Cable Converter Search Method Catv Converter Remote Control Brand Code NumberTips on Identifying Your Cable Converter Calling for Service Before Calling for ServiceProblem Possible RemedyAntes de llamar al servicio de reparaciones ProblemaPosible Solución X X X X X X X X32-48 27NS300/32/36NS400 31/00, 826 AM 32-48 27NS300/32/36NS400 31/00, 826 AM 32-48 27NS300/32/36NS400 31/00, 826 AM 32-48 27NS300/32/36NS400 31/00, 826 AM 32-48 27NS300/32/36NS400 31/00, 826 AM Consumer Limited Warranty Limited WarrantySharp Electronics Corporation

32N S400, 36N S400, 27N S300 specifications

The Sharp 27N S300, 36N S400, and 32N S400 are a trio of advanced display technologies that cater to diverse consumer needs and professional applications. Each model showcases Sharp’s commitment to quality, innovation, and exceptional visual performance.

The Sharp 27N S300 is designed for those seeking a versatile and compact display solution. With a 27-inch screen, this model delivers a Full HD resolution, ensuring vibrant color reproduction and sharp imagery. It utilizes Sharp’s proprietary IGZO (Indium Gallium Zinc Oxide) technology that enhances energy efficiency while providing superior image quality, particularly in brightness and color accuracy. This model also features wide viewing angles, allowing multiple viewers to enjoy consistent colors without distortion.

Transitioning to the 36N S400, this model steps up the game with a 36-inch screen size and an Ultra HD resolution of 4K. Its larger size and enhanced resolution make it an ideal choice for both commercial displays and high-end home cinema setups. The 36N S400 incorporates HDR (High Dynamic Range) technology, which enables a more extensive range of colors and contrasts, bringing a cinematic experience to any viewing environment. Furthermore, the model supports various connectivity options, including HDMI and DisplayPort, ensuring compatibility with a multitude of devices.

The Sharp 32N S400 presents a balance between size and performance with its 32-inch display. It offers a 4K resolution and is designed for efficiency in both home and office settings. The model features Sharp’s proprietary Aquos technology, which enhances color fidelity and contrasting elements, making media more immersive. The 32N S400 also comes equipped with built-in speakers, reducing the need for additional audio equipment, and promotes user convenience through wireless connectivity options, ideal for presentations and media streaming.

In terms of characteristics, all three models are designed with user-friendly interfaces, making installation and operation straightforward. They come equipped with various picture modes tailored for different uses, whether it’s gaming, watching movies, or productivity tasks.

Overall, Sharp’s 27N S300, 36N S400, and 32N S400 cater to various preferences while maintaining high performance and reliability. Their advanced technologies and features make them suitable options for anyone seeking superior display solutions.
Top Page Image Contents