Sharp 36N S400, 27N S300, 32N S400 warranty To Identify Your Cable Converter Search Method

Page 39

Operation of Remote Control (Continued)

(1)Slide TV-CATVswitch to CATV.

(2)Press and hold down DISPLAY and CH DOWN (9) on your remote control.

Then release both buttons.

(3)Within ten seconds after releasing DISPLAY and CH DOWN (9), enter your converter’s two- digit code number using REMOTE KEYPAD (refer to list).

•The remote control is now ready to send commands to your converter.

•Some brands have more than one remote code listed due to changes in the remote codes from early to later model years. In such cases, you may have to try more than one code to find the code your converter accepts.

NOTE:

Depending on the model, year produced, brand, and type of CATV converter, some models may not be compatible with the remote control.

LTo Identify Your Cable Converter – Search Method.

(1)Slide TV-CATVswitch on the remote to CATV.

(2)Press the POWER button on the cable converter to ON.

(3)Stand at least six feet away from the converter. Point the remote towards the converter.

Hold down the DISPLAY and CH UP (8) at the same time. KEEP HOLDING THE BUTTONS DOWN.

(4)Watch the Channel Number indicator on the converter.

Channel numbers will scan up when the converter has been identified.

Release the DISPLAY and CH UP (8) as soon as the channel numbers start to scan up. The converter’s remote control code number has been identified, and the remote is ready to operate the converter.

TIPS ON IDENTIFYING YOUR CABLE CONVERTER:

Be Patient: a minute or two can seem a lot longer when you’re waiting for something to happen, but the code should be identified within two minutes. Remember, it is only a one-time set-up.

Be careful not to let the CATV converter scan more than five channels when the indicator starts to move up. If you continue holding down the DISPLAY and CH UP (8) after five channel scans, the proper remote code can be passed up, and the two minute identify cycle will have to be repeated.

If a channel change does not occur on the cable converter within two minutes, read the identifying instructions again and repeat the steps. Should a channel change still not occur, the remote will not operate with the desired converter.

CATV CONVERTER

REMOTE CONTROL

BRAND

CODE NUMBER

 

 

Anvision ____________

07, 08

Cable Star ___________

07, 08

Eagle ______________

08

Eastern International __

02

General Instrument ____

04, 05, 15, 23, 24, 25,

 

30, 36

Hamlin _____________

12, 13, 34

Jerrold ______________

04, 05, 15, 23, 24, 25,

 

30, 36

Macom _____________

37

Magnavox ___________

07, 08, 19, 25, 28, 29,

 

32, 33, 40, 41

NSC _______________

09

Oak ________________

01, 16, 38

Oak Sigma __________

18

Panasonic ___________

27, 39

Philips ______________

07, 08, 19, 26, 28, 29,

 

32, 33, 40, 41

Pioneer _____________

18, 20

Randtek ____________

07, 08

RCA _______________

27, 43

Regal ______________

12, 13

Regency ____________

02

Scientific Atlantic ______

03, 22, 42

Sony _______________

44

Sylvania ____________

11

Teknika _____________

06

Texscan ____________

11

Tocom ______________

17, 21

Unika ______________

31

Viewstar ____________

07, 08, 19, 26, 28, 29,

 

32, 33, 40, 41

Zenith ______________

14

 

 

NOTE:

Some satellite receivers can be operated by the REMOTE CONTROL. If you have a Satellite Receiver, you can use the above method to search for available channels.

39

32-48 27NS300/32/36NS400 1.1

39

5/31/00, 8:26 AM

Page 38 Page 40
Image 39
Page 38 Page 40
Contents 27N-S300 32N-S400 36N-S400 Important Information First WarrantySecond Consumer Product Safety ACT What is Energy StarImportant Information Important Safeguards NEC National Electrical Code Supplied Accessories Before Operating Your TelevisionAntenna Connections Combination VHF/UHF Separate VHF/UHF32N-S400 and 36N-S400 models only Combination VHF/UHF Quick Reference Control Operation 27N-S30032N-S400, 36N-S400 Nota Referencia rápida de los controles de operaciónRemarque Référence rapide sur les commandesTo cancel EZ Setup EZ Setup during First Power OnLanguage Demo ModeDescription of Adjustment Items Sleep TimerVideo Adjust Timer SET modeInternal Speaker Switch Audio SelectMTS Multichannel TV Sound If stereo sound is difficult to hear HOW to SET Closed CaptionClosed Caption ExampleMpaa Rating Mode DataParent Control V-CHIP Operation ChipRating TV Parental GuidelinesExample 3 Reset an Age-Based setting Example 1.2 Age-Based settingExample 2.1 Content- Based setting Example 2.2 Content-Based settingHOW to SET V-CHIP Mpaa Rating Repeat steps 1 3 of 1 Mpaa Rating TV GuidelinesActivate on to Turn on V-CHIP Block To change the V-CHIP Block setting. Secret No. is registered Additional mode Additional mode ExampleParent Control View Timer View TimerStatus ON/OFF setting of View Timer How to set View Timer To change the View Timer settings. Secret No. is registered On the set Energy SaveEZ Setup Set UpChannel Setting Saving broadcast TV channels into memory StartStop Blue Screen Use CH UP 8 or Down 9 or RemoteBy setting the Personal Preference channels in advance Personal PreferenceYou can select your favorite channels easily Universal Plus Function To select the Personal Preference channelPIP Picture In Picture To Move the Inset Picture Freeze-Frame Inset PicturesPIP is on and Insert Picture is blocked To watch video material playback Using the Video and Audio Input JacksConnecting video equipment for playback of video material Connecting video device equipped with video output terminalUsing the Audio Output Jacks Identifying Remote VCR and Cable TV Converters Operation of Remote ControlUniversal Remote Control Using Your Remote With Your TVTo Identify Your VCR Search Method HOW to Identify a VCRTips on Identifying Your VCR VCR Brand Remote Control Code NumberCatv Converter Remote Control Brand Code Number To Identify Your Cable Converter Search MethodTips on Identifying Your Cable Converter Possible Remedy Before Calling for ServiceCalling for Service ProblemX X X X X X X X ProblemaAntes de llamar al servicio de reparaciones Posible Solución32-48 27NS300/32/36NS400 31/00, 826 AM 32-48 27NS300/32/36NS400 31/00, 826 AM 32-48 27NS300/32/36NS400 31/00, 826 AM 32-48 27NS300/32/36NS400 31/00, 826 AM 32-48 27NS300/32/36NS400 31/00, 826 AM Consumer Limited Warranty Limited WarrantySharp Electronics Corporation

32N S400, 36N S400, 27N S300 specifications

The Sharp 27N S300, 36N S400, and 32N S400 are a trio of advanced display technologies that cater to diverse consumer needs and professional applications. Each model showcases Sharp’s commitment to quality, innovation, and exceptional visual performance.

The Sharp 27N S300 is designed for those seeking a versatile and compact display solution. With a 27-inch screen, this model delivers a Full HD resolution, ensuring vibrant color reproduction and sharp imagery. It utilizes Sharp’s proprietary IGZO (Indium Gallium Zinc Oxide) technology that enhances energy efficiency while providing superior image quality, particularly in brightness and color accuracy. This model also features wide viewing angles, allowing multiple viewers to enjoy consistent colors without distortion.

Transitioning to the 36N S400, this model steps up the game with a 36-inch screen size and an Ultra HD resolution of 4K. Its larger size and enhanced resolution make it an ideal choice for both commercial displays and high-end home cinema setups. The 36N S400 incorporates HDR (High Dynamic Range) technology, which enables a more extensive range of colors and contrasts, bringing a cinematic experience to any viewing environment. Furthermore, the model supports various connectivity options, including HDMI and DisplayPort, ensuring compatibility with a multitude of devices.

The Sharp 32N S400 presents a balance between size and performance with its 32-inch display. It offers a 4K resolution and is designed for efficiency in both home and office settings. The model features Sharp’s proprietary Aquos technology, which enhances color fidelity and contrasting elements, making media more immersive. The 32N S400 also comes equipped with built-in speakers, reducing the need for additional audio equipment, and promotes user convenience through wireless connectivity options, ideal for presentations and media streaming.

In terms of characteristics, all three models are designed with user-friendly interfaces, making installation and operation straightforward. They come equipped with various picture modes tailored for different uses, whether it’s gaming, watching movies, or productivity tasks.

Overall, Sharp’s 27N S300, 36N S400, and 32N S400 cater to various preferences while maintaining high performance and reliability. Their advanced technologies and features make them suitable options for anyone seeking superior display solutions.
Top Page Image Contents