Sharp LC-22GA3X Sound Volume Changing Channels, To adjust the volume, To mute the sound

Page 12

 

Basic Operation (Continued)

Sound Volume

Changing Channels

To adjust the volume

You can select channels using Channel Select or CH ( )/( ).

Press VOL (+) to increase the sound volume. The numerical value increases.

VOLUME 50

Press VOL (–)to decrease the sound volume. The numerical value decreases.

VOLUME 10

To mute the sound

Press e (Mute) to temporarily turn off the sound. The MUTE mark is displayed on the screen.

Press e (Mute) or VOL (+)/(–)to turn the sound back to the previous level. MUTE is automatically cleared when one of the following buttons is pressed: POWER,

VOL (+)/(–) or e (Mute).

VOLUME 10

To handle the increasing number of channels available, this LCD TV set allows you to select up to 100 positions (Channels 0 to 99). One-digit and two-digit methods of selection can be used. Follow the procedure shown below to select channels.

Using Channel Select

To select a one-digit channel (e.g., Channel 5):

1

Press 5 of Channel Select.

 

 

2

If “5-” is indicated and the picture does not change,

 

press -/--to switch over to the 1-digit select mode

 

and press 5 of Channel Select.

 

 

 

 

 

 

1

 

 

 

PAL

 

 

 

B/G

 

 

 

 

 

 

 

 

 

To select a two-digit channel (e.g., Channel 15):

1 Press -/--to set the 2-digit select mode.

--

2 Press 1 of Channel Select.

1-

3 Press 5 of Channel Select.

15

PAL

B/G

NOTE

Complete this procedure within 4 seconds, otherwise the selection will not be made.

Changing channels with CH ( )/( ) on the remote control.

Press CH ( ) and the channels change in the order shown below: 1 2 3 . . . 98 99 0 1 2 3 . . .

Press CH ( ) and the channels change in the order shown below: 3 2 1 0 99 98 . . . 3 2 1 . . .

Using A (Flashback)

Press A to switch the currently tuned channel to the previously tuned channel.

Press A again to switch back to the currently tuned channel.

11

Image 12
Contents LC-22GA3M LC-22GA3X LC-22GA3M LC-22GA3X Dear Sharp Customer Important Safety Precautions TrademarksSupplied Accessories AC cord Antenna cableAAA size batteries ⋅2 Cable clamps ⋅2 Pages 5Installing Batteries in the Remote Control Using Remote ControlPrecautions regarding batteries PreparationPower Connection Listening with HeadphonesUsing the AC adapter PreparationPart Names of Main Unit How to fix the cables Part Names of Main UnitCarrying handle Cable clampsPart Names of Remote Control Flashback Returns to the previous channel. PDolby Cyan Yellow MuteTurning On and Off the Main Power Basic OperationStandby To turn off the LCD TVSound Volume Changing Channels To adjust the volumeUsing Channel Select Using a FlashbackPreset Upper control panelPreset Presetting the Channels ManualSelect the channel position using Channel Select or CH Press Menu PRESET-1 twice to return to the normal screenChannel Setting Auto Channel Setting ManualClock Setup Perform steps 1 and 2 in Channel Setting Auto toMenu setting screens Timer FunctionsSelecting Menu Items 14, 24Basic Adjustment Settings Picture AdjustmentsAV Mode BoosterBasic Adjustment Settings Colour System AV1, AV2 or AV3 Mode Colour TemperaturePress / to select the desired item, and press OK Selected item Press \Setup Film Mode DNR Digital Noise ReductionQuick Shoot Press / to select Interlace or PROGRESSIVE, and press OKUseful Features Sound AdjustmentsDirectly setting the Virtual Dolby Surround Speech EmphasisUseful Features WSS Wide Screen SignallingDisplay Mode ModeOn-Screen Display Language Setting AV3 IN/OUTBacklight Wide Mode Directly setting the Wide modePosition Vertical Position Timer Functions Auto Power OFFNo Operation OFF Blue BackPress Menu to exit When the OFF position is selected Nicam Broadcast SelectionStereo Press / to select NICAM, and press \/to select OFFA2 Stereo Broadcast Selection Teletext Changing subpages Using Teletext menu Using the TOP tableUseful Features for Teletext TeletextConnecting with External Devices Example of External Devices that can be ConnectedExample Camcorder Home video game system ExampleConnecting with External Devices Outputting Video and Audio Video OutputDVD Player Camcorder Connect to a VCR, audio amplifier, etcTroubleshooting LCD TV setSpecifications TroubleshootingAntenna LC-22GA3M / LC-22GA3XDimensional Drawings Unit mm