Sharp LC-22GA3X, LC-22GA3M operation manual Presetting the Channels Manual

Preset (Continued)

Presetting the Channels (MANUAL)

■Setting a channel to a desired TV station

Upper control panel

4 3 1, 2, 6

■In a weak reception area or under bad reception conditions

Upper control panel

41, 2, 3, 5

1Press MENU (PRESET-1) on the upper part of the LCD TV set for more than 2 seconds to display the AUTO mode screen.

2Press MENU (PRESET-1) to display the MANUAL mode screen.

3While the MANUAL mode screen is displayed, press MENU (PRESET-1) for more than 2 seconds.

The channel position number remains in green.

1 Press MENU (PRESET-1) on the upper part of the LCD TV set for more than 2 seconds to display the AUTO mode screen.

Sound system

AUTO(B/G)

VHF 1 48.25MHZ

2 Press MENU (PRESET-1) to display the MANUAL mode screen.

•Press MENU (PRESET-1) again to change the MANUAL mode as shown below.

AUTO MANUAL LANGUAGE NORMAL SCREEN

3 Select the channel position using Channel Select or CH ( )/( ).

MANUAL(B/G)

VHF 1 48.25MHZ

4 Press VOL (–)/(+)to locate the channel you want to preset to the position. Search is initiated and when a TV signal is received during the search, the search stops.

5 Repeat steps 3 and 4 above, to preset the channel positions for other broadcasts, etc.

MANUAL(B/G)

UHF 5 623.25MHZ

6 Press MENU (PRESET-1) twice to return to the normal screen.

NOTE

•System may not have been set correctly, if noise can be heard or if there is no sound. In such a case, adjust “SOUND SYSTEM”. (See page 14.)

4 Adjust for good reception using VOL (–)/(+).

5 After finishing the adjustment, press MENU (PRESET-1) to continue channel presetting.

NOTE

•While the MANUAL mode screen is displayed, press MENU (PRESET-1).

(The LANGUAGE mode screen will appear.)

MANUAL(B/G)

VHF 1 48.25MHZ

Press MENU for more than

2 seconds.

FINE

UHF 5 623.25MHZ

E N G L I S H

13