Sharp LC-22GA3M, LC-22GA3X operation manual Preset, Upper control panel

Preset

On-Screen Display Language Selection Presetting the Channels (AUTO)

MENU on the LCD TV set can also be used to select the language.

Automatically tunes in and presets receivable TV stations. Make sure the antenna cable is properly connected.

Upper control panel			Upper control panel
3	1, 2	4	2	1

1 Press MENU (PRESET-1) on the upper part of the LCD TV set for more than 2 seconds to display the PRESET mode screen.

AUTO(B/G)

VHF 1 48.25MHZ

2	Press MENU (PRESET-1) twice to display the				1	Press MENU (PRESET-1) on the upper part of the
	LANGUAGE select mode screen.					LCD TV set for more than 2 seconds to display the
	• Press MENU (PRESET-1) again to change the					AUTO mode screen.
	PRESET mode as shown below.								Sound System
	AUTO	MANUAL	LANGUAGE	NORMAL SCREEN
							AUTO(B/G)
							VHF	1
							48.25MHZ
NOTE
• Instead of pressing MENU for more than 2 seconds, you can set
the language by selecting “LANGUAGE” in “SETUP” in the Menu
screen. (See page 21.)

E N G L I S H

2 Press VOL (–)/(+)(PRESET-2) on the upper part of the LCD TV set. All the TV stations in your area that can be received by the LCD TV set are automatically preset.

3 The screen shows whatever is on channel 1 when full auto channel preset is finished.

3 Press CH ( )/( ) to select the language you wish to display.

4 Press TV/VIDEO to return to the normal screen.

1

PAL

B/G

NOTE

•When starting PRESET after setting “SOUND SYSTEM” with MENU on the remote control, “SOUND SYSTEM” for all channels are stored into memory.

•Unused channels are automatically skipped.

•The Preset mode is only available in the TV mode.

•Instead of pressing MENU for more than 2 seconds, you can set the channel by selecting “CH SETUP” in “SETUP” in the Menu screen. (See page 14.)

12