Sharp PN-V602 installation manual Safety Precautions

Page 4

E 2

SAFETY PRECAUTIONS

Electricity is used to perform many useful functions, but it can also cause personal injuries and property damage if improperly handled. This product has been engineered and manufactured with the highest priority on safety. However, improper use can result in electric shock and/or fire. In order to prevent potential danger, please observe the following instructions when installing, operating and cleaning the product. To ensure your safety and prolong the service life of your LCD product, please read the following precautions carefully before using the product.

1.Read instructions — All operating instructions must be read and understood before the product is operated.

2.Keep this manual in a safe place — These safety and operating instructions must be kept in a safe place for future reference.

3.Observe warnings — All warnings on the product and in the instructions must be observed closely.

4.Follow instructions — All operating instructions must be followed.

5.Cleaning — Unplug the power cord from the AC outlet before cleaning the product. Use a dry cloth to clean the product. Do not use liquid cleaners or aerosol cleaners.

6.Attachments — Do not use attachments not recommended by the manufacturer. Use of inadequate attachments can result in accidents.

7.Water and moisture — Do not use the product near water. Do not install the product in a place where water may splash onto it. Be careful of equipment which drains water such as an air-conditioner.

8.Ventilation — The vents and other openings in the cabinet are designed for ventilation.

Do not cover or block these vents and openings since insufficient ventilation can cause overheating and/or shorten the life of the product. Do not place the product on a sofa, rug or other similar surface, since they can block ventilation openings. Do not place the product in an enclosed place such as a bookcase or rack, unless proper ventilation is provided or the manufacturer’s instructions are followed.

9.Power cord protection — The power cords must be routed properly to prevent people from stepping on them or objects from

resting on them.

10. The LCD panel used in this product is made of glass. Therefore, it can break when the product is dropped or applied with impact. Be careful not to be injured by broken glass pieces in case the LCD panel breaks.

11. Overloading — Do not overload AC outlets or extension cords. Overloading can cause fire or electric shock.

12. Entering of objects and liquids — Never insert an object into the product through vents or openings. High voltage flows in the product, and inserting an object can cause electric shock and/or short internal parts.

For the same reason, do not spill water or liquid on the product.

13. Servicing — Do not attempt to service the product yourself. Removing covers can expose you to high voltage and other dangerous conditions. Request a qualified service person to perform servicing.

14. Repair — If any of the following conditions occurs, unplug the power cord from the AC outlet, and request a qualified service person to perform repairs.

a.When the power cord or plug is damaged.

b.When a liquid was spilled on the product or when objects have fallen into the product.

c.When the product has been exposed to rain or water.

d.When the product does not operate properly as described in the operating instructions.

Do not touch the controls other than those described in the operating instructions. Improper adjustment of controls not described in the instructions can cause damage, which often requires extensive adjustment work by a qualified technician.

e.When the product has been dropped or damaged.

f.When the product displays an abnormal condition. Any noticeable abnormality in the product indicates that the product needs servicing.

15.Replacement parts — In case the product needs replacement parts, make sure that the service person uses replacement parts specified by the manufacturer, or those with the same characteristics and performance as the original parts. Use of

unauthorized parts can result in fire, electric shock and/or other danger.

16. Safety checks — Upon completion of service or repair work, request the service technician to perform safety checks to ensure that the product is in proper operating condition.

17. Wall mounting — When mounting the product on a wall, be sure to install the product according to the method recommended by the manufacturer.

18. Heat sources — Keep the product away from heat sources such as radiators, heaters, stoves and other heat-generating products (including amplifiers).

19. Batteries — Incorrect use of batteries may cause the batteries to burst or ignite. A leaky battery may corrode the equipment, dirty your hands or spoil your clothing. In order to avoid these problems, make sure to observe the precautions below:

Use the specified batteries only.

Install the batteries with due attention to the plus (+) and minus (-) sides of the batteries according to the instructions in the compartment.

Do not mix old and new batteries.

Do not mix batteries of different types. Voltage specifications of batteries of the same shape may vary.

Replace an exhausted battery with a new one promptly.

If you will not use the remote control for a long time, remove the batteries.

If leaked battery fluid gets on your skin or clothing, rinse immediately and thoroughly. If it gets into your eye, bathe your eye well rather than rubbing and seek medical treatment immediately. Leaked battery fluid that gets into your eye or your

clothing may cause a skin irritation or damage your eye.

20. Usage of the monitor must not be accompanied by fatal risks or dangers that, could lead directly to death, personal injury, severe physical damage or other loss, including nuclear reaction control in nuclear facility, medical life support system, and missile launch control in a weapon system.

Image 4
Contents PN-V602 Neutral EarthLive Important Information ContentsDear Sharp Customer Safety Precautions Safety Precautions Safety InstructionMounting Precautions Supplied Components ConnectionsMultiple monitor connection ConnectionsConnection with RS-232 cable Connection with video cableConnection with the control kit optional Installing the batteriesFor the monitor Landscape orientation Portrait orientation Turning Power On/Off Turning on the main powerTurning power on/off NDate/time settingInformation Importante Table des matièresCher Client Précautions DE Sécurité Précautions DE Sécurité Suite Mesures DE SécuritéPrécautions Pour LE Montage Connexions Composants fournisLorsque le PN-ZB02 optionnel est raccordé Connexion de plusieurs moniteurs ConnexionsConnexion avec le câble vidéo Connexion avec le câble RS-232Mise en place des piles Connexion au récepteur de télécommande optionnelPour le moniteur en Position horizontale Position verticale Mise sous/hors tension Mise sous tension et hors tensionNRéglage de la date/heure Información Importante Estimado Cliente DE SharpPrecauciones DE Seguridad Precauciones DE Seguridad Continuación Instrucciones DE SeguridadPrecauciones DE Montaje Componentes suministrados ConexionesConexión de múltiples monitores ConexionesConexión con cable de vídeo Conexión con cable RS-232Conexión con el kit de control opcional Instalación de las pilasEncendido/apagado Encendido/apagadoNAjuste de fecha y hora LED indicador Botón de encendido de conexiónPage 11HKS1 TINSE1193MPZZ1
Related manuals
Manual 60 pages 23.69 Kb Manual 60 pages 10.1 Kb