Sharp PN-V602 Multiple monitor connection, Connections, Connection with RS-232 cable

Connections

Multiple monitor connection

[Example]

	Remote control sensor box
	(Supplied with the PN-ZR01 (optional))
Second monitor	First monitor
Secondary	Primary
(Expansion unit)	(Main unit)
ID No.: 2	ID No.: 1
Third monitor	Fourth monitor
Secondary	Secondary
(Expansion unit)	(Expansion unit)
ID No.: 3	ID No.: 4

■ Connection with RS-232 cable

If you connect the monitor in a daisy chain using RS-232 cable, using the monitor buttons on the primary (main unit), settings are copied to the secondary (expansion unit) and operation from the primary can perform operation for all monitors. Setting each ID No. in the monitor is required.

The first monitor will be set as primary (main unit) and the second monitor and beyond will be secondaries (expansion units).

Connect the RS-232C cables in order, starting with the first monitor (primary monitor). If monitors are connected in a different order they may not be operable.

First monitor: primary Second monitor: secondary

*Always install the remote control sensor box on the primary monitor.

■ Connection with video cable

May vary depending on the system being used.

If using the PC/AV DVI-D terminal, up to 5 monitors can be connected in a daisy chain. (When the PN-ZB02 is attached)

First monitor Second monitor

PC/AV DVI-D	PC/AV DVI-D	PC/AV DVI-D
input terminal	output terminal	input terminal

Digital signal (DVI) cables

(commercially available)

To PC digital RGB output terminal

shows the signal flow

RS-232C	RS-232C	RS-232C
output terminal	input terminal	output terminal

RS-232 straight cable (commercially available)

Third monitor: connects to secondary RS-232C input terminal

Connect the third monitor and other monitors in the same manner.

Up to 25 monitors can be connected. (Depending on the length of the cable used and the surrounding environment.) ID Number is set with the primary monitor’s buttons. If you set AUTO ASSIGN ID No., located in the menu of the monitor to ON, the ID No. will be automatically assigned in order from the primary.

E6