Sharp PN-V602 Connection with the control kit optional, Installing the batteries

■ Connection with the control kit (optional)

If performing operation of the monitor with the remote control unit, the PN-ZR01 control kit (optional) is required.

Attach the remote control sensor box as shown in the illustration. (Right side recommended)

For the monitor in	For the monitor in
landscape orientation	portrait orientation

Caution

•When attaching the remote control sensor box, turn the main power switch OFF.

•Connect the monitors together in a daisy chain with RS-232 cable.

1.Insert the anti-rotation protrusion of the mounting bracket into the anti-rotation hole of the monitor.

2.Secure the stand angling hole of the monitor with the mounting screw.

3.Adjust the angle of the remote control sensor box, and secure it with the fixing screw, so that it may accurately receive signals from the remote control unit.

Stand angling hole

Remote control sensor box

Angle
adjustment
Fixing screw	Anti-rotation hole
	Anti-rotation protrusion
Mounting screw (short)
	Mounting bracket

4.Insert the remote control sensor box connection cable into the control kit terminal.

Remote control sensor box

Control kit terminal Connection cable

Connections

Installing the batteries

1.Press the cover gently and slide it in the direction of the arrow.

2.See the instructions in the compartment and put in the batteries (R-6 (“AA” size) x 2) (supplied with the PN-ZR01 (optional)) with their plus (+) and minus (-) sides oriented correctly.

3.Close the cover.

ENGLISH

7 E