Audio Menu
You can adjust the sound quality to your preference with the following settings.
Example
Audio
Power Control Menu
Power control setting allows you to save energy.
Example
Power Control
Treble | [ | 0] | a15 |
Bass | [ | 0] | a15 |
Balance | [ | 0] | L |
Surround |
|
|
|
Bass Enhancer
Reset
b15 |
b15
R
[Off]
[On]
Power Saving | [Off] |
No Signal Off | [Disable] |
No Operation Off | [Disable] |
1Press MENU to display the MENU screen, and then press c/d to select "Power Control".
2Press a/b to select a specifi c adjustment item, and then press ENTER.
3Press a/b (or c/d) to select the desired setting, and then press ENTER.
4Press MENU to exit.
Power Saving
This function allows you to set the Power Saving level
1Press MENU to display the MENU screen, and then press c/d to select "Audio".
2Press a/b to select a specifi c adjustment item.
•Select "Surround" or "Bass Enhancer" and then press ENTER to set each item.
3Press a/b (or c/d) to select the desired setting, and then press ENTER.
4Press MENU to exit.
Selected item | cbutton | dbutton |
Treble | For weaker treble | For stronger treble |
|
|
|
Bass | For weaker bass | For stronger bass |
|
|
|
Balance | Decrease audio from | Decrease audio from |
| the right speaker | the left speaker |
•Audio menu is grayed out when Output Select is set to "Variable". (See page 29.)
•For resetting all Audio adjustment items to the factory preset values, press a/b to select "Reset", press ENTER, press c/d to select "Yes", and then press ENTER.
Surround
Surround function allows you to enjoy realistic "live" sound.
On: Surround function is on.
Off: Normal sound.
•You can choose Surround by pressing SURROUND on the remote control unit. (See page 16.)
•Audio menu is grayed out when Output Select is set to "Variable". (See page 29.)
•For some discs, setup may be required on your DVD player. In this case, please refer to the operation manual of your DVD player.
Bass Enhancer
This function allows you to enjoy
On: Bass Enhancer function is on.
Off: Normal sound.
•Audio menu is grayed out when Output Select is set to "Variable". (See page 29.)
in order to decrease the power consumption and increase the backlight lifespan.
Standard: Optimizes power reduction based upon video content. When set to "Standard", "
" appears on the screen.
Advanced: Optimizes power reduction based upon video content and engages OPC. When set to "Advanced",
"
" appears on the screen. Off: This function does not work.
•"Power Saving" does not function when you set AV MODE to "AUTO" or "DYNAMIC (Fixed)".
•You cannot select a different Power Saving item for each
AV MODE.
When "Power Saving" is set, the "OPC" settings for all AV Modes will automatically change.
•When "Power Saving" is set to "Standard" or "Advanced", the Power Saving leaf icon appears to the left of "OPC" in the Picture menu screen.
•You can select Power Saving by pressing POWER SAVING on the remote control unit. (See page 18.)
No Signal Off
When set to "Enable", the power will automatically shut down if there is no signal for 15 minutes.
•When it is 5 minutes before the power shuts down, the remaining time will start to keep appearing every minute.
•"Disable" is the factory preset value.
•When a TV program fi nishes, this function may not operate.
No Operation Off
When set to "Enable", the power will automatically shut down if there is no operation for 3 hours.
•When it is 5 minutes before the power shuts down, the remaining time will start to keep appearing every minute.
•"Disable" is the factory preset value.
24