Sharp PN-V601 manual 19 E

Page 19

Controlling the Monitor with a PC (RS-232C)

nCommands for ID control

The command examples shown on this page assume the following connection and ID number set up.

ID number: 1 ID number: 2 ID number: 3 ID number: 4

IDST .........A monitor receiving this command sets its own ID

number in the parameter field.

Example:

IDST0001

OK 001 ← The ID number of this monitor is set to 1.

IDLK ........The parameter of this command sets the ID

number of the monitor. The monitor is subject to all subsequent commands.

Example:

IDLK0002

Following commands are for the monitor

 

 

 

with ID number: 2.

WAIT

 

Searching for monitor with ID number:

 

 

 

2

OK

002

Found monitor with ID number: 2

VOLM0030

Sets volume of monitor with ID

 

 

 

number: 2 to 30.*

WAIT

 

Processing

OK

002

 

 

TIPS

You can automatically assign ID numbers by using the IDST command with the Repeater control (see “Repeater control” on page 20).

For example, using the command “IDST001+” automatically sets the ID numbers, as shown below.

[Example]

ID number: 1 ID number: 2 ID number: 3 ID number: 4

VOLM0020 ←

WAIT

OK 002 IDLK0000 ←

WAIT ← OK 002 ← VOLM0010

OK 001 ←

Sets volume of monitor with ID number: 2 to 20.*

Canceling fixed ID number setting

Canceling IDLK

Cancelation complete

The volume of the monitor with ID number: 1 (the one directly connected to the PC) is set to 10. (IDLK is canceled.)

IDST001 +

ID setting command with repeater control

WAIT

 

 

OK

001

“OK” response from ID number: 1

OK

002

“OK” response from ID number: 2

OK

003

“OK” response from ID number: 3

OK

004

“OK” response from ID number: 4 (End)

IDSL ........The parameter of this command sets the ID number

of the monitor. The monitor is subject to the next command.

Example:

IDSL0002

The next command is for the monitor

 

 

 

with ID number: 2.

WAIT

 

Searching for monitor with ID number:

 

 

 

2

OK

002

Found monitor with ID number: 2

VOLM0030

Sets volume of monitor with ID

 

 

 

number: 2 to 30.

WAIT

 

Processing

OK

002

OK response from monitor with ID

 

 

 

number: 2

VOLM0020

Sets volume to 20.

OK

001

 

The volume of the monitor with ID

number: 1 (the one directly connected

to the PC) is set to 20.*

*The IDSL command is effective only once, for the immediately succeeding command.

*The IDLK command remains effective until it is canceled, or power is shut off.

IDCK........Provides screen display of the ID number currently

assigned to a monitor, and the ID number currently set for IDLK (if any).

Example:

(After executing IDLK0002)

IDCK0000

(Parameter has no meaning.)

 

 

Returned response. The ID

ID : 001

IDLK : 002

number is also displayed on the

 

 

monitor screen.

IDCK000 +

Repeater control. (If a command

WAIT

 

is used with repeater control, ID

 

designation using IDSL or IDLK

ID : 001 IDLK : 000

is canceled.)

 

ID : 002 IDLK : 000

 

ID : 003

IDLK : 000

 

ID : 004

IDLK : 000

 

19 E

Image 19
Contents PN-V601 Contents NFront view Part NamesNRear view Page Display Basic OperationMute MenuCut off Basic Operation NSwitching the screen sizeWide Zoom Normal Dot by DotSpecified Monitor Remote Control ModePress or , select the mode, then perform settings This Monitor onlyNMenu screen display Menu ItemsDisplaying the menu screen NExample of operationNSCREEN Menu item detailsMenu Items NPICTURE Menu Items NAUDIO NSETUPNOPTION 11 EMenu Items NPIP/PbyP Menu Items NMULTINDual screen display 13 E Menu Items NZOOM2 Special SettingSetting procedure Set using the Multi menuInput PowerMenu Items NSCHEDULE DAY of the Week15 E Adjustments for PC screen displayNAutomatic adjustment NScreen display for adjustmentLED ALL ResetTemperature Alert Adjustment LockPC connection Communication procedureControlling the Monitor with a PC RS-232C 17 ENID numbers NCommunication interval19 E Setting of the Gamma user data Controlling the Monitor with a PC RS-232C RS-232C command tablePower control/Input mode selection 21 EAudio menu Controlling the Monitor with a PC RS-232C Picture menu23 E Controlling the Monitor with a PC RS-232C Setup menuControlling the Monitor with a PC RS-232C Option menu Horizontal orientation Vertical orientation Image Position Epos setting25 E Controlling the Monitor with a PC RS-232C Multi menuControlling the Monitor with a PC RS-232C PIP/PbyP menu Initialization/Functional Restriction Setting Function menu27 E Commands for setting of the Gamma user dataControlling the Monitor with a PC RS-232C Others Controlling the Monitor with a PC LAN Settings to connect to a LANTo set on the monitor To set from a PC This monitor is factory preset as shown below IP AddressDefault Gateway 0.0 29 EIf the Dhcp Client is set to OFF, specify an IP address See pages 31 to 35 for details on each settingControlling with a PC Basic operation31 E IP Address 1 to User Name / PasswordDNS Server Accept IP Address33 E Confirmation Attach the log file to a TEMPERATURE/HARDWARE error e-mailRecipient E-MAIL Addresses Condition35 E Troubleshooting 37 E SpecificationsNPN-V601 Product Specifications NPN-ZR01 optional Product SpecificationsNDDC plug and play Specifications NDimensional DrawingsNPower management Dmpm Digital Monitor Power Management39 E Specifications NCompatible signal timing PCSpecifications NCompatible signal timing AV 41 E PN-V601 G EN10G1
Related manuals
Manual 42 pages 42.72 Kb

PN-V601 specifications

The Sharp PN-V601 is a cutting-edge display solution that meets the demands of various professional environments. This 60-inch LCD monitor is designed for commercial use, offering a blend of remarkable performance, flexibility, and reliability.

One of the standout features of the PN-V601 is its superb display quality. With a Full HD resolution of 1920 x 1080 pixels, this monitor delivers vibrant colors and sharp images that are essential for presentations, digital signage, and collaborative workspaces. The display utilizes advanced LCD technology, which provides wide viewing angles up to 178 degrees both horizontally and vertically. This ensures that the content remains visible and engaging from various positions in a room.

The PN-V601 is engineered with a sleek and slim design, making it an aesthetically pleasing addition to any environment. Its thin bezels allow for seamless video wall configurations, enabling the creation of large-scale visual displays. When arranged in a multi-screen setup, the PN-V601 ensures minimal gaps between the screens, enhancing the overall viewing experience.

In terms of connectivity, the Sharp PN-V601 is equipped with a wide range of input options, including HDMI, DisplayPort, and DVI-D. This versatility allows for easy integration with external devices such as computers, media players, and video conferencing systems, ensuring that users can present or share information without hassle.

One of the key technologies integrated into the PN-V601 is the advanced image processing capabilities, which enhance image quality through features like fine-tuning of brightness and color correction. This technology ensures that every detail is vividly displayed, making it ideal for showcasing high-definition content.

Moreover, the PN-V601 has been designed for continuous operation, making it suitable for environments that require displays to run around the clock, such as retail displays and control rooms. The robust build quality ensures longevity and durability, reducing maintenance costs over time.

Another notable characteristic is its energy efficiency. The PN-V601 adheres to modern sustainability standards, minimizing power consumption while delivering outstanding performance. This makes it an environmentally friendly choice, aligning with corporate social responsibility initiatives.

Overall, the Sharp PN-V601 offers a powerful combination of elegance, functionality, and advanced technology, making it an exceptional choice for businesses looking to enhance their visual communication capabilities. Whether used for digital signage, presentations, or collaborative work, this display is engineered to impress.