Sharp PN-V601 manual Controlling with a PC, Basic operation

Page 30

Controlling the Monitor with a PC (LAN)

5. Click on “LAN SETUP” under NETWORK.

6. Specify the “DHCP CLIENT”, “IP ADDRESS”,etc.

DHCP CLIENT

If your LAN has a DHCP server and you wish to obtain an address automatically, change this setting to “ON”.

To set the address manually, set this to “OFF”.

IP ADDRESS

If the DHCP CLIENT is set to “OFF”, specify an IP address.

SUBNET MASK

If the DHCP CLIENT is set to “OFF”, specify the subnet mask.

DEFAULT GATEWAY

If the DHCP CLIENT is set to “OFF”, specify the default gateway.

If you are not using a default gateway, specify “0.0.0.0”.

7.When the setting is changed, click [Apply].

8.Check the message and click [OK].

9.Exit Internet Explorer.

10.Restore the PC’s IP address jotted in Step 6, “(2) Specifying the PC’s IP address”.

11.Connect the monitor and the PC to the LAN.

Caution

•Wait 10 seconds after clicking [OK] before proceeding.

•When operating using the remote control unit or similar, click [Refresh].

Controlling with a PC

■ Basic operation

You use Internet Explorer on a PC on the LAN to control the monitor.

1.Launch Internet Explorer on the PC.

2.In the “Address” box, type “http://” followed by your monitor’s IP address followed by “/”, then press the Enter key.

When prompted to enter a user name and password, type the user name and password that you specified in the security settings (see page 32), and click [OK].

If you did not make any security settings, leave the spaces blank and click on [OK].

3.You can check, control, and change the monitor’s status and settings by clicking the menu items on the left side of the screen.

•If you see an [Apply] button next to a setting, click it after you change that setting.

TIPS

•See pages 31 to 35 for details on each setting.

•If you click [Refresh] before the screen finishes updating the current display, the “Server Busy Error” will appear.

Wait for a moment before operating your monitor again.

•You cannot operate the monitor while it is warming up.

•If “DHCP CLIENT” is set to “ON”, press DISPLAY on the remote control unit two times and then check the monitor’s IP address.

E30

Page 29 Page 31
Image 30
Page 29 Page 31
Contents PN-V601 Contents Part Names NFront viewNRear view Page Menu Basic OperationMute DisplayDot by Dot Basic Operation NSwitching the screen sizeWide Zoom Normal Cut offThis Monitor only Remote Control ModePress or , select the mode, then perform settings Specified MonitorNExample of operation Menu ItemsDisplaying the menu screen NMenu screen displayMenu item details NSCREENMenu Items NPICTURE NSETUP Menu Items NAUDIO11 E NOPTIONMenu Items Menu Items NMULTI NPIP/PbyPNDual screen display Set using the Multi menu Menu Items NZOOM2 Special SettingSetting procedure 13 EDAY of the Week PowerMenu Items NSCHEDULE InputNScreen display for adjustment Adjustments for PC screen displayNAutomatic adjustment 15 EAdjustment Lock ALL ResetTemperature Alert LED17 E Communication procedureControlling the Monitor with a PC RS-232C PC connectionNCommunication interval NID numbers19 E Setting of the Gamma user data 21 E RS-232C command tablePower control/Input mode selection Controlling the Monitor with a PC RS-232CControlling the Monitor with a PC RS-232C Picture menu Audio menuControlling the Monitor with a PC RS-232C Setup menu 23 EControlling the Monitor with a PC RS-232C Option menu Controlling the Monitor with a PC RS-232C Multi menu Image Position Epos setting25 E Horizontal orientation Vertical orientationInitialization/Functional Restriction Setting Function menu Controlling the Monitor with a PC RS-232C PIP/PbyP menuCommands for setting of the Gamma user data 27 EControlling the Monitor with a PC RS-232C Others Settings to connect to a LAN Controlling the Monitor with a PC LANTo set on the monitor 29 E This monitor is factory preset as shown below IP AddressDefault Gateway 0.0 To set from a PCBasic operation See pages 31 to 35 for details on each settingControlling with a PC If the Dhcp Client is set to OFF, specify an IP address31 E Accept IP Address User Name / PasswordDNS Server IP Address 1 to33 E Condition Attach the log file to a TEMPERATURE/HARDWARE error e-mailRecipient E-MAIL Addresses Confirmation35 E Troubleshooting NPN-ZR01 optional Product Specifications SpecificationsNPN-V601 Product Specifications 37 EDmpm Digital Monitor Power Management Specifications NDimensional DrawingsNPower management NDDC plug and playSpecifications NCompatible signal timing PC 39 ESpecifications NCompatible signal timing AV 41 E PN-V601 G EN10G1
Related manuals
Manual 42 pages 42.72 Kb

PN-V601 specifications

The Sharp PN-V601 is a cutting-edge display solution that meets the demands of various professional environments. This 60-inch LCD monitor is designed for commercial use, offering a blend of remarkable performance, flexibility, and reliability.

One of the standout features of the PN-V601 is its superb display quality. With a Full HD resolution of 1920 x 1080 pixels, this monitor delivers vibrant colors and sharp images that are essential for presentations, digital signage, and collaborative workspaces. The display utilizes advanced LCD technology, which provides wide viewing angles up to 178 degrees both horizontally and vertically. This ensures that the content remains visible and engaging from various positions in a room.

The PN-V601 is engineered with a sleek and slim design, making it an aesthetically pleasing addition to any environment. Its thin bezels allow for seamless video wall configurations, enabling the creation of large-scale visual displays. When arranged in a multi-screen setup, the PN-V601 ensures minimal gaps between the screens, enhancing the overall viewing experience.

In terms of connectivity, the Sharp PN-V601 is equipped with a wide range of input options, including HDMI, DisplayPort, and DVI-D. This versatility allows for easy integration with external devices such as computers, media players, and video conferencing systems, ensuring that users can present or share information without hassle.

One of the key technologies integrated into the PN-V601 is the advanced image processing capabilities, which enhance image quality through features like fine-tuning of brightness and color correction. This technology ensures that every detail is vividly displayed, making it ideal for showcasing high-definition content.

Moreover, the PN-V601 has been designed for continuous operation, making it suitable for environments that require displays to run around the clock, such as retail displays and control rooms. The robust build quality ensures longevity and durability, reducing maintenance costs over time.

Another notable characteristic is its energy efficiency. The PN-V601 adheres to modern sustainability standards, minimizing power consumption while delivering outstanding performance. This makes it an environmentally friendly choice, aligning with corporate social responsibility initiatives.

Overall, the Sharp PN-V601 offers a powerful combination of elegance, functionality, and advanced technology, making it an exceptional choice for businesses looking to enhance their visual communication capabilities. Whether used for digital signage, presentations, or collaborative work, this display is engineered to impress.
Top Page Image Contents