Watching TV
Initial setup
When you turn on the System for the first time, it will automatically memorize the broadcasting channels where you live. Perform the following steps before you press TV POWER on the remote control unit.
1.Insert the batteries into the remote control unit. (See page 9.)
2.Connect the antenna cable to the AVC System. (See page 13.)
3.Plug in the AC cord to the AC outlet. (See page 15.)
Language menu
Language
English
Français
Español
Antenna menu
Air/Cable
Air
Cable
Searching TV channels
CH Search
Air 2
1. Setting a language
1Press a/b to select the desired language listed on the screen.
2Press SET/ENTER to enter the setting.
2. Setting the antenna mode
1Press a/bto select “Air” or “Cable” on the screen.
2Press SET/ENTER to enter the setting.
3. Automatic channel searching
Channel auto search makes the System look for all channels viewable in the set area.
A
•If no channel is found, “No program found. Is antenna connected properly?” displays. And the auto channel search finishes.
•If you want to try EZ Setup again, see page 25.
•Channel search function is available for
•
•You may need to manually add the cable converter output
channel setting (fixed), when connecting the cable converter output signal to the B terminal (ANT/CABLE 75q) on the AVC System (rear).(See page 27.)
17