Basic adjustment settings
Power control
Power Control setting allows you to reduce the display brightness to save energy.
Power control for AV source
| TV CBL | VCR DVD |
|
TV | /SAT | /LD |
|
| /DTV |
|
|
POWER | INPUT |
| |
AV | FRONT |
|
|
MODE | SURROUND | MTS | CC |
| TWIN |
|
|
| PICTURE | SELECT |
|
VIEW |
| SUB | TWIN CH |
MODE | FREEZE | INPUT |
|
DISPLAY | SLEEP | EDIT/ | LEARN |
1 | 2 | 3 |
4 | 5 | 6 |
7 | 8 | 9 |
| 0 | 100 ENT |
+FLASHBACK
VOL | CH |
−MUTE
MENU | TV/SAT/DVD | DTV/DVD TOP | |
RETURN |
| MENU | MENU |
SOURCE |
|
| DTV/SAT |
POWER |
|
| GUIDE |
|
| SET/ |
|
| ENTER | DTV/SAT | |
|
|
| |
|
|
| INFO |
| FAVORITE CH | VCR REC | |
|
| ||
A | B | C | D |
POWER | INPUT | VOL− | VOL+ |
RECEIVER
MENU |
|
Power control |
|
Power Save | [Save1] |
Standard |
|
Save1 |
|
Save2 |
|
Auto |
|
Power save
When set to “Save1”, “Save2” or “Auto”, power consumption is reduced by decreasing picture brightness.
A
•“Power Save“ may not activate when setting to “Auto” under bright ambient light conditions.
1
2 Press a/b to select “Power control”, and then press SET/ENTER.
3 Press a/bto select “Power Save”, and then press SET/ENTER.
4 Press a/bto select the desired mode, and then press SET/ENTER.
5 Press MENU to exit the menu.
Selected item | Description | |
|
| |
Save1 | The screen darkens slightly to conserve | |
power consumption. | ||
| ||
|
| |
Save2 | The screen darkens more significantly to | |
conserve power consumption. | ||
| ||
|
| |
| Screen brightness adjusts according to | |
Auto | the ambient light of the room to conserve | |
| power consumption. | |
|
|
A
•When setting to “Auto”, make sure no object obstructs the OPC sensor, which could affect its ability to sense surrounding light.
•“Standard” is factory preset value.
•Return to the previous menu by pressing MENU RETURN.
MENU |
|
Power Control |
|
No Signal off | [Disable] |
Disable |
|
Enable |
|
No Signal off
When set to “Enable”, the power will automatically shut down if no signal inputs for 15 minutes.
1 Press MENU.
2 Press a/b to select “Power Control”, and then
press SET/ENTER.
3 Press a/bto select “No Signal off”, and then press
SET/ENTER.
4 Press a/bto select “Enable”, and then press SET/
ENTER.
5 Press MENU to exit the menu.
•Five minutes before the power shuts down, hazard warning displays every minute.
A
•“Disable” is factory preset value.
•Return to the previous menu by pressing MENU RETURN.
•When enabled, the system will not start up again even if a signal is received.
35