Sharp LC-70UD1U, LC70UD1U On-Screen Display Menu Operation, Menu Operation Buttons, Lcfont

On-Screen Display Menu

LCFONT embedded

					On-Screen Display Menu Operation
System	Initial	Information	Picture	Menu
Options	Setup		Settings
: Select	ENTER : Enter RETURN : Back	MENU : Exit	Picture Settings		Example
						System	Initial	Information	Picture	Menu
						Options	Setup		Settings
			AV MODE (Changing Pic.Quality)			: Select	ENTER : Enter RETURN : Back MENU : Exit		Picture Settings
				[STANDARD]

THX Room Mode Setting				AV MODE (Changing Pic.Quality)
OPC						[STANDARD]
				THX Room Mode Setting
Backlight				OPC
[ b5]		a16	b16			[On:Display]
Contrast				Backlight
[b30]		0	b40	[ b5]	a16	b16
Brightness				Contrast
			b30	[b30]	0	b40
[	0]	a30		Brightness
Color
				[ 0]	a30	b30
[ b2]		a30	b30	Color
Tint				[ b2]	a30	b30
				Tint
[	0]	a30	b30
Sharpness				[ 0]	a30	b30
				Sharpness
[ b2]		a10	b10
				[ b2]	a10	b10

	Advanced			Advanced
1 Guide display
		1 Press MENU to display the MENU screen.
• This indicates the buttons that can be operated on the displayed screen. The guide display varies depending on
the menu setting screen.		2 1 Press c/d to select the desired menu.
• The operations for some selected items may be displayed in the operational guide bar at the bottom of the		2 Press a/b to select a specifi c adjustment item, and then press ENTER.
screen.
			• Additional related adjustment items may be displayed. Press a/b to select the desired item.
2 Item displayed in blue
		3 Adjust the item while referring to the guide display.
• This indicates the item currently selected.
			• Operations vary depending on the function or item. Refer to the guide display corresponding to the menu
• Press ENTER to go to the adjustment screen for this item.
			setting screen for button operations.
3 Item in brackets
		3 Press MENU to exit.
• This indicates the current setting for the item.
4 Item displayed in white		NOTE
• This indicates that the item can be selected.		• Menu options differ in the selected input modes, but the operating procedures are the same.
5 Item displayed in gray

•This indicates that the item cannot be selected.

There are various reasons why the items cannot be selected, but the main reasons are as follows:

—Nothing is connected to the selected input terminal.

—The function is not compatible with the current input signal.

■About Menu Items

• Some menu items may not be displayed depending on the selected input source.

NOTE

•The screens in the operation manual are for explanation purposes (some are enlarged, others cropped) and may vary slightly from the actual screens.

•The order of explanations for each menu item in the following pages is not necessarily in accordance with the alignment of the items on the screen.

LCFONT:

•This product is embedded with LC Font technology, which was developed by SHARP Corporation for clearly displaying easy-to-read characters on LCD screens.

Menu Operation Buttons

Using the remote control

Use the following buttons on the remote control to operate the menu.

MENU: Press to open or close the menu screen.

a/b/c/d: Press to select a desired item on the screen or adjust a selected item.

ENTER: Press to go to the next step or complete the setting.

RETURN: Press to return to the previous step.

Using the control panel of the TV

You can also operate the menu with the control panel of the TV.

Button operations on the control panel correspond to the ones on the remote control as shown below.

MENU:	MENU on the remote control.
INPUT:	ENTER on the remote control.

CHU/V: Cursor a/b on the remote control.

VOLk/l: Cursor c/d on the remote control.

19