Watching 2D Images in 3D, 3D Menu, 3D Setup

Enjoying 3D Image Viewing

Watching 2D Images in 3D

You can convert normal 2D images into 3D images.

1Press 3D.

2Press c/d to select "2D➝3D", and then press

ENTER.

3Turn on the 3D Glasses and place them on your head.

NOTE

• The TV returns to 2D mode after 1 hour has passed.

Switching to the Previous Mode

You can switch back to the previous mode by pressing 3D.

1Press 3D.

•A conﬁ rmation screen is displayed.

2Select "Yes" and then press ENTER.

•The TV returns to the previous mode.

3D Menu

Pressing 3D in 3D mode displays the 3D menu. Press the colored buttons to make the necessary settings.

B:3D Surround (See page 22.)

The surround mode changes each time you press B.

C:2D➝3D Convert Effect

D:3D Setup

Conﬁguring the TV Settings to Enhance 3D Image Viewing

You can adjust the 3D image to the desired image quality and make various settings for 3D image viewing.

•Set the 3D viewing settings with "System Options" > "3D Setup".

NOTE

•Which items can be selected/adjusted differs depending on whether the TV is in 2D mode or in 3D mode.

AV MODE

The audio and video settings can be changed to suit the program or input content being watched.

3D: For a highly deﬁ ned image in a normal lighting.

GAME(3D): Lowers image brightness for easier viewing.

NOTE

•You can select AV MODE by pressing AV MODE on the remote control unit.

3D Setup

You can make various settings to enhance 3D image viewing.

3D Auto Change

This setting can be used to switch to 3D mode automatically when a 3D identiﬁ cation signal is detected.

Set the desired mode according to the type of media you are viewing, such as video from a connected device or video from an internet application.

Mode 1: 3D mode is selected automatically when a 3D signal is detected while viewing video from a VOD service or HDMI-connected equipment.

Mode 2: 3D mode is selected automatically when, in addition to detecting a 3D signal while viewing video from a VOD service or HDMI-connected equipment, a video pattern with "Side by Side" or "Top and Bottom" format is also detected.

Off: Auto change is not performed.

NOTE

•This function does not work when the input source is Composite, Component, RGB or Analog/Digital tuner.

3D Depth Control

Select the method for adjusting the 3D depth.

Auto: The depth is adjusted automatically.

Manual: You can manually adjust the depth using the function "Depth Change".

NOTE

•This function is only available when the input signal is 3D.

•This function may not be displayed depending on the type of 3D signal.

Depth Change

Adjusts the depth manually. "0" is the level where no adjustment is made.

NOTE

•This function is only available when "3D Depth Control" is "Manual".

2D➝3D Convert Effect

You can adjust the 3D effect when converting images from 2D mode to 3D mode.

Select a desired level of convert effect from +1 to +16.

NOTE

•This function is only available when converting 2D images to 3D images.

•When you use this function, image conversion on the TV will result in some differences in the original images and how they appear.

•2D images that have been converted to 3D images may be viewed only for personal use.

Viewing Time Info

This displays the elapsed time of 3D image viewing.

Yes: Displays the elapsed viewing time on the screen every hour.

No: Does not display the elapsed viewing time.