Using the Internet, Interactive Service, Exit

Using the Internet

■IP Setup

You can make adjustments manually for the IP.

•Check that numbers are displayed for each setting.

•If there are any settings without numbers, specify the numbers by following the on-screen instructions.

•Input the IP address by using remote control buttons 0-9.

	Example
Setting IP information
	[Current Setup]
IP Address	: Auto Setup
Netmask	: Auto Setup
Gateway	: Auto Setup
DNS	: Auto Setup
MAC Address	: XX:XX:XX:XX:XX:XX

Change		Initialize

Connection Test

After the connecting and setting procedures have been completed, you can check that the preparation is correct. Press "Yes" to start the "Connection Test".

•When the test results are displayed, follow the instructions shown on the screen.

Interactive Service

If you do not want other people to connect to the Internet in your absence, you can make settings to keep the TV away from the Internet.

•Input the 4-digit secret number by using remote control buttons 0-9.

NOTE

•If you have failed to connect to the Internet, then an error message will appear. In this case, press EXIT to exit from the connected TV feature to make changes to the network settings.

•If you still cannot connect to the Internet, please consult your Internet service provider or telephone company.

•When an application is used, you cannot make settings for "Internet Setup".

If you need to make the settings of "Internet Setup", press EXIT to exit from the connected TV feature.

■If you cannot connect to the Internet

If the TV fails to connect to the Internet, then select "Network Setup" and;

• When the TV is in a wired LAN connection, make sure

the values for "IP Setup" are all correctly set.

Entering Text (Software Keyboard)

When you are editing an input screen or specifying the Network settings used for accessing the Internet, enter text from the software keyboard.

NOTE

•You can enter up to 128 characters for text.

•Some special characters or diacritics may not be available depending on where you enter the text.

The text you enter is displayed as you type it in.

To move the cursor (the current input position), use "" or "" on the software keyboard.

While you are entering text, likely input conversion candidates are displayed based on what you typed in.

• In the case of a wireless LAN connection, check the

settings of "Wireless Setup".

Caps Off/Caps Lock

If "alphabet" is selected, this switches characters between uppercase and lowercase.

Each time you press ENTER, the character type switches as shown below:

Caps Off: all the characters are lowercased

Caps Lock: all the characters are uppercased

Shift

Capitalizes the ﬁ rst character entered.

alphabet/Sign

Press ENTER to select the type of characters entered: alphabet, or sign.

Back space/Delete

Erases text one character at a time.

Enter

Applies the entered information and closes the software keyboard.

Space

Enters a space.

Clear

Erases the character string.

•When the cursor is somewhere in a line: the character string to the right of the cursor will be erased.

•When the cursor is at the right end of a line: the entire line will be erased.

Quit

Closes the software keyboard without applying the entered information.

	Buttons on the	Description
	remote control unit	Description
	remote control unit

	a/b/c/d	Moves the focus. When moved at the far edge, the focus moves to the opposite edge.
	ENTER	Performs the processing for the button currently in the focus.
	EXIT	Closes the software keyboard without applying the original input elements for the entered
	EXIT	text.
		text.
	RETURN	When the cursor is at the end of a sentence, this acts as a back space.
	0-9	Directly enters the single-byte number for that button.
		When A, B or C is pressed on the remote control while the characters to be entered in
	A, B, C	the likely input conversion candidate are displayed in A, B or C on the keyboard, that
		character string is entered into the display ﬁ eld.
	D	Enters a space