Sharp LC-C52700UN Preparation, Antennas, Installing Batteries in the Remote Control Unit

Page 9

Preparation

Antennas

To enjoy a clearer picture, use an outdoor antenna. The following is a brief explanation of the types of connections that are used for a coaxial cable. If your outdoor antenna uses a 75-ohm coaxial cable with an F-type connector, plug it into the antenna terminal at the rear of the TV set.

1.A 75-ohm system is generally a round cable with F-type connector that can easily be attached to a terminal without tools (Commercially available).

2.A 300-ohm system is a fl at “twin-lead” cable that can be attached to a 75-ohm terminal through a 300/75-ohm adapter (Commercially available).

F-type connector

75-ohm coaxial cable (round)

300-ohm twin-lead cable (fl at)

NOTICE F-type connector should be finger-tightened only.

When connecting the RF cable to the TV set, do not tighten F-type connector with tools.

If tools are used, it may cause damage to your TV set. (The breaking of internal circuit, etc.)

Connecting Antenna Cable

F-type connector

75-ohm coaxial cable

Connect the antenna cable to the TV using one of the methods in the illustration as shown (1, 2, 3 or 4).

1Cable without a CATV converter

2VHF/UHF antenna

3Combination VHF/ UHF antenna

Cable TV lead-In

75-ohm coaxial cable (round)

75-ohm coaxial cable (round)

Home Antenna terminal (75-ohm)

Coaxial cable (commercially available)

Home Antenna terminal (75-ohm)

Coaxial cable (commercially available)

 

or

300/75-ohm adapter

300-ohm twin-lead cable (flat)

 

(commercially available)

 

 

 

 

 

 

 

4 Separate VHF/UHF

 

UHF

300-ohm

VHF

ANTENNA

antenna

twin-lead cable

 

 

ANTENNA

 

300-ohm twin-lead cable

or 75-ohm coaxial cable

IN OUT

Combiner (commercially available)

To TV antenna terminal

Installing Batteries in the Remote Control Unit

If the remote control fails to operate TV functions, replace the batteries in the remote control unit.

1 Open the battery cover.

2 Insert two “AA” size batteries

3 Close the battery cover.

 

(supplied with the product).

 

Place the batteries with their terminals corresponding to the (e) and (f) indications in the battery compartment.

CAUTION

Improper use of batteries can result in chemical leakage or explosion. Be sure to follow the instructions below.

Do not mix batteries of different types. Different types of batteries have different characteristics.

Do not mix old and new batteries. Mixing old and new batteries can shorten the life of new batteries or cause chemical leakage in old batteries.

Remove batteries as soon as they are worn out. Chemicals that leak from batteries that come in contact with skin can cause a rash. If you fi nd any chemical leakage, wipe thoroughly with a cloth.

The batteries supplied with this product may have a shorter life expectancy due to storage conditions.

If you will not be using the remote control unit for an extended period of time, remove batteries from it.

9

Image 9
Contents LC-C46700UN LC-C52700UN Supplied AccessoriesFor connections Declaration of Conformity09P12-MX-NM Information Important InformationDear Sharp Customer Additional Safety InformationCaring for the Cabinet Precautions when transporting the TVCaring for the Liquid Crystal panel Child SafetyUsing an optional bracket to mount the TV Setting the TV on the WallAttaching/Detaching the Stand Hanging on the wallUsing the Remote Control Unit Power indicator on the front of the television lights GreenQuick Reference Connecting Antenna Cable Installing Batteries in the Remote Control UnitPreparation AntennasPart Names TV FrontTV Rear/Side Connecting to External Equipment Connecting an Audio AmplifierConnecting a PC Turning On/Off the Power Initial SetupWatching TV Sleep Timer Changing VolumeDirect Button Operation Changing ChannelsDigital broadcasting audio mode MTS/SAP stereo modeDirect Button Operation ⑨ PCPress Input again or press a/b to select the input source Press InputDisplays channel information being viewed. Press Display Press CCFor PC input mode Press View ModeYou can select the screen size For 43 programsOn-Screen Display Menu Operation On-Screen Display MenuMenu Operation Buttons LcfontOPC Setting Advanced Picture SettingPicture Menu Audio Menu Power Control MenuSetup Menu Reset Auto Sync For Analog PC Input Mode OnlyParental Ctrl Parental Control Setting Fine SyncChip On-Screen Display Menu StatusMpaa Voluntary movie rating system TV Parental GuidelinesCanadian English Ratings How to temporarily release the V-CHIP BlockCanadian French Ratings Reactivating the temporarily released V-CHIP BlockInput Option MenuDigital Setup Enter Troubleshooting AppendixPages 18 Error message about reception of broadcast Troubleshooting Digital BroadcastingAppendix E202RS-232C Port Specifications Specifications Optional AccessoryModel LC-C46700UN Model LC-C52700UN Part name Model number Wall mount bracketPC Compatibility Chart Information on the Software License for This ProductClearing the Secret Number Limited Warranty Calling for Service

LC-C52700UN, LC-C46700UN specifications

The Sharp LC-C46700UN and LC-C52700UN are two advanced LCD display models that cater to various commercial and educational applications. These models are designed to deliver high-quality visuals, reliability, and functionality, making them popular choices for users seeking premium display solutions.

One of the key features of the LC-C46700UN is its 46-inch screen size, while the LC-C52700UN boasts a larger 52-inch display. Both monitors combine a sleek design with a thin bezel, maximizing the viewing area and providing a modern aesthetic suitable for any environment. Their high-resolution screens ensure sharp and crisp images, making them ideal for presentations, advertisements, and interactive displays.

Both models employ Sharp's advanced LCD technology, which enhances color accuracy and contrast. This technology ensures that images are vivid and lifelike, allowing for enhanced viewer engagement. The displays utilize LED backlighting for improved energy efficiency and a longer lifespan compared to traditional CRT displays. This not only contributes to reduced operating costs but also makes these models environmentally friendly.

Connectivity is another highlight of the LC-C46700UN and LC-C52700UN. They come equipped with multiple input options, including HDMI, VGA, and USB ports, allowing for versatile connection to various devices such as computers, laptops, or media players. This extensive connectivity makes it possible to integrate the displays into existing setups with ease.

The LC-C46700UN and LC-C52700UN also feature built-in speakers, providing an all-in-one solution for multimedia presentations. This eliminates the need for additional audio equipment, streamlining the user experience. Both models support various video formats, ensuring compatibility with a wide range of content.

For commercial applications, both models support continuous operation, making them suitable for signage and advertising in retail environments. Their reliable performance ensures that businesses can deliver messages effectively without interruption.

In summary, the Sharp LC-C46700UN and LC-C52700UN are state-of-the-art LCD displays that offer exceptional visual quality, advanced connectivity options, and reliable performance. Their combination of modern design and functional features makes them ideal choices for a variety of commercial, educational, and entertainment settings. With these displays, users can expect enhanced presentations, engaging advertisements, and overall improved viewing experiences.