Sharp LC-C52700UN Connecting to External Equipment, Connecting an Audio Amplifier, Connecting a PC

Connecting to External Equipment

You can connect many types of external equipment to your TV. To view external source images, select the input source from INPUT on the remote control unit or on the TV. (See page 15.)

For connecting the TV to external equipment, use commercially available cables.

CAUTION

•To protect equipment, always turn off the TV before connecting any external equipment.

•Please read the relevant operation manual (Blu-ray disc player, etc.) carefully before making connections.

Connecting a Blu-ray Disc Player, DVD Player, Cable/Satellite Set-top Box, VCR, Game Console or Camcorder

Higher Quality

Standard Quality

Terminal on the TV	Cable	Terminal on external
		equipment
INPUT 5, 6, 7 or 8	HDMI-certified cable
INPUT 1 or 2	Component video cable
	Audio cable
INPUT 2	S-VIDEO cable
	Audio cable
INPUT 1 or 3	AV cable

*1

*2

*2

*3

*3

*3

*1 When using an HDMI-DVI conversion cable, you should make an analog audio connection. In this case, in addition to connecting an HDMI-DVI conversion cable to the INPUT 6 (HDMI) terminal, connect an audio cable to the AUDIO terminal and set "PC Audio Select" to "Input 6 (HDMI)". (See page 24.)

*2 To enjoy 1080p display capability, connect your external equipment using an HDMI-certifi ed cable or a component cable and set the equipment to 1080p output.

*3 The COMPONENT terminals take priority over the VIDEO (INPUT 1) and S-VIDEO (INPUT 2) terminals.

Connecting an Audio Amplifier

Terminal on the TV	Cable	Terminal on external
		equipment
DIGITAL AUDIO	Optical fiber cable
OUTPUT

AUDIO OUTPUT

Audio cable

•Depending on the connected equipment, audio will not output from the DIGITAL AUDIO OUTPUT terminal in HDMI connection. In this case, set the audio formats of the connected equipment to PCM, 32/44.1/48 kHz.

Connecting a PC

Terminal on the TV Cable Terminal on PC

INPUT 4

RGB cable

Ø 3.5 mm stereo minijack cable

INPUT 5, 6, 7 or 8

HDMI-certified cable

•When connecting a PC to the INPUT 4, set "PC Audio Select" to "Input 4 (PC)". (See page 24.)

•Depending on the board, only video signals may be output. In this case, in addition to connecting an HDMI-certifi ed cable to the INPUT 6 (HDMI) terminal, connect an audio cable to the AUDIO terminal and set "PC Audio Select" to "Input 6 (HDMI)". (See page 24.)

•The HDMI terminals only support digital signal.

•Refer to page 31 for a list of PC signals compatible with the TV.

11